Loading ...
Loading ...
Loading ...
Trouble shooting en
25
3Trouble shooting
Tr oubl e s hoot i ng
If a fault occurs, there is often a simple explanation.
Before calling the after-sales service, please refer to the
fault table and attempt to correct the fault yourself.
Fault table
If a dish does not turn out as well as you had hoped,
refer to the section entitled Tested for you in our cooking
studio
. It contains useful tips and information on
cooking, baking, roasting and frying.
:Warning – Risk of electric shock!
Incorrect repairs are dangerous. Repairs must only be
carried out by one of our trained after-sales technicians.
Fault Possible cause Remedy/information
The appliance does not start. The fuse is faulty Check the fuse in the fuse box.
Power failure Check whether the kitchen light or other kitchen
appliances are working.
Disruption of gas supply Make sure that the gas supply valves are open.
The oven light has failed The oven light is faulty Replace the oven light. (see section entitled "Replac-
ing the oven light")
The gas burner does not ignite. Power cut or damp ignition plugs Light the gas burner with a gas lighter or a match.
Do not operate the oven without power.
The flame (oven) does not burn through all
of the outlet openings.
Normal build-up of dirt The burner must be professionally cleaned.
All dishes prepared in the oven burn within a
short period of time.
The thermostat is faulty Call the after-sales service.
The door panel steams up when the oven
heats up.
This is a normal occurrence caused by the tem-
perature difference
No intervention needed; this has no effect on perfor-
mance.
The oven switches off. The gas pressure is too high or too low Check whether the correct pressure regulator is
being used.
Power failure Check the oven's power supply.
Incorrect installation Make sure that the appliance was installed in
accordance with the installation instructions.
The cooling fan is not working The cooling fan is faulty Call the after-sales service.
Loading ...
Loading ...
Loading ...