Loading ...
Loading ...
Loading ...
5
SETTING DELAY START
This feature can delay the start of a wash programme by 1 to 12 hours.
1 Load the dishes, add detergent and close the door.
2 Open the door to turn the dishwasher on.
3 Check that the display shows the wash programme you require. If not, see instructions
for ‘Changing the wash programme’.
4 Touch and hold
The delay start indicator will light up and the display will show the
delay time (hours).
5 Touch again to increase the number of hours you wish to delay the wash by
(1hr - 12hr in hour steps).
Note: Scrolling past 12 hours will exit delay start.
6 Delay start is now set. The display will countdown in hours. The wash programme will
automatically start when the delay time is over.
The Delay start indicator will be on when Delay start begins its countdown.
If the door is open when the countdown is finished, the dishwasher will beep and the
display will flash. After 7 seconds the dishwasher will turn off.
To cancel Delay start, touch and hold until there is a beep.
touch and hold
Loading ...
Loading ...
Loading ...