Loading ...
Loading ...
Loading ...
en
13
Home Connect
This appliance is Wi-Fi-capable and can
be remotely controlled using a mobile
device.
Note
Wi-Fi is a registered trade mark of the Wi-
Fi Alliance.
If the appliance is not connected to the
home network, the appliance functions
like a refrigerator without a network
connection and can still be manually
operated via the controls.
In order to use the Home
Connect functions, connect the
appliance with a Home Connect Wi-Fi
dongle.
If there is no Home Connect Wi-Fi dongle
included with your appliance, you can
order this from customer service.
Note
Inserting and removing the plug on the
rear side of the appliance is more difficult
than expected. Ensure that the plug is
completely plugged in.
Attach the Home Connect Wi-Fi dongle
at a height of 1 metre.
Notes
■ Please observe the safety instructions
and warnings in these instructions for
use. Ensure that these are also
adhered to when you are operating
the appliance using the Home
Connect app and are not at home.
Follow the instructions in the Home
Connect app as well.
■ Operation on the appliance always
has priority over operation via the
Home Connect app. During this time it
is not possible to operate the
appliance using the app.
Home Connect setup
Notes
■ Observe the Home Connect
supplementary sheet, which is
available for download under http://
www.siemens-home.bsh-group.com
with the instructions. To do so, enter
the E-number of your appliance in the
search field.
■ After switching on the appliance, wait
at least two minutes until internal
device initialisation is complete. Only
then start setting up Home Connect.
■ To make settings with Home Connect,
the Home Connect app must be
installed on your mobile device.
Please observe the Home
Connect documents supplied for
doing this.Follow the steps specified
by the app to make the settings.
■ If the appliance is not operated for a
long time, the Home Connect menu
closes automatically. You can find
information on how to open the Home
Connect menu at the start of the
appropriate sections.
Automatic connection with the home
network (WLAN)
If a WLAN router with WPS function is
available, you can automatically connect
the refrigerator to the home network.
1. Press the super cooling button and
the lock/alarm off button
simultaneously to open the Home
Connect menu.
The display shows Cn.
Note
Press both buttons at exactly the
same time.Button operation is locked
if only the lock/alarm off button is
pressed for a longer period. Press the
lock/alarm off button again until the
lock is deactivated.
Loading ...
Loading ...
Loading ...