Loading ...
Loading ...
Loading ...
en
10
Switching on the
appliance
1. First insert the plug into the
connection on the back of the
appliance. Check that the plug has
been inserted all the way.
2. Then insert the other end of the cable
into the socket.
The appliance is now switched on and a
warning signal sounds.
Press the lock/alarm off button to switch
off the audible warning signal.
The alarm display goes out when the
appliance has reached the set
temperature.
The preset temperatures are reached
after several hours. Do not put any food
in the appliance beforehand.
The factory has recommended the
following temperatures:
■ freezer compartment: -18°C
■ hyperFresh compartment: 0 °C to
2 °C
■ cooling compartment: +4°C
Operating tips
■ After the appliance has been switched
on, it may take several hours until the
set temperatures have been reached.
■ The fully automatic NoFrost system
ensures that the freezer section
remains free of ice. Defrosting is no
longer required.
■ If the door cannot be immediately re-
opened after it has been closed, wait
until the resulting low pressure has
equalised.
■ The front and side panels of the
housing are partly heated slightly.This
prevents condensation from forming.
Setting
the temperature
Fig. $
Refrigerator compartment
The temperature can be set from +2 °C
to +8 °C.
1. Press selection button 10 until
refrigerator compartment display 1 is
activated.
2. Keep pressing +/– buttons 11 until
the required temperature is indicated.
Perishable food should not be stored
above +4 °C.
hyperFresh compartment
The temperature can be set from -1°C to
3°C.
1. Press selection button 10 until
hyperFresh 4 display is activated.
2. Keep pressing +/- buttons until the
required temperature is indicated.
Freezer compartment
The temperature can be set from -16°C
to -24°C.
1. Select the freezer compartment using
the compartment button.
2. Keep pressing the +/- buttons until the
required temperature is indicated.
Loading ...
Loading ...
Loading ...