Loading ...
Loading ...
Loading ...
7
To install the camera onto a wall, follow the steps below:
1. Please take out the installation position map in the accessories bag, and then stick it on the ceiling or the wall.
2. Drill bottom holes according to the installation position map and then insert three expansion bolts into the bottom holes. Secure
these three bolts firmly.
3. Disassemble the device
For the device shown in Figure2-1 (a), the steps of disassembling the device are as follows: Step 1 Press the button on the
pedestal to make it expand.
Step 2 Press the dome enclosure down the cable exit to separate the pedestal and the dome enclosure and disassemble the
device.
Figure 2-3
For the device shown in Figure 2-2 (b), loosen the locking screw, pull the enclosure downward,
and then disassemble the device.
4. Select run the wire through bottom or side and insert multi-function cable into exit hole on installation surface. Bottom wiring:
select to lead out the cable through ceiling or wall, which can protect the cable effectively.
Side wiring: Select to lead out the cable through side exit and add metal conduit, etc, which can prevent the cable from being
destroyed.
Figure 2-4
Figure 2-5
Loading ...
Loading ...
Loading ...