Loading ...
Loading ...
Loading ...
32
Updating the Software via the Network
1
Press
a
/
b
on the Manual Update screen to select
"Network Update", and then press ENTER.
•
The TV connects to the network and checks for updates.
• To cancel, press ENTER.
Abort
Connecting to Internet..
Checking for the latest software version..
Accessing..
2
The current version of the TV and the latest version
of software are displayed. To update the TV
software, select “Yes”, and then press ENTER.
Latest software version has been found.
A software update is available.
Proceed with update?
Current Version
：UXXXXXX1
：UXXXXXX2
Update Version
NoYes
• When a server connection cannot be established or an
update is not available, a message is displayed.
If a server connection cannot be established, check the
broadband connection and Internet Setup.
Cannot reach the server.
Check the network settings and try again.
OK
OK
The TV does not need to be updated.
3
After the update file is downloaded, the software
update process begins.
Downloading the latest software..
Abort
Update Version
50%
Do not unplug AC cord.
Remote control operation is disabled during update process.
Updating to the latest software..
Update V
ersion
• Do not unplug the AC cord while the software is
being updated.
4
When the software is successfully updated, a
5
Press ENTER. the TV automatically turns off and then
turns on again.
screen is displayed indicating that the update
process is completed.
Software update is complete.
Update Version
• If the software was not updated successfully, check the
broadband connection and Internet Setup, and then try
updating the software again.
OK
OK
Failed to complete update.
Please retry from Software Update menu.
On-Screen Display Menu
Updating the Software with a USB Memory Device
Downloading...
：UXXXXXX2
：UXXXXXX2
：UXXXXXX2
To check for the availability of a software update, visit
http://www.sharpusa.com/products/support/. If you
have any questions, please
call 1-800-BE-SHARP (800-237-4277).
CAUTION
• Do not remove the USB memory device or unplug
the AC cord while the software is being updated.
• Be sure to properly follow the whole procedure
described below, step by step. Otherwise, for
example, the TV cannot read the data in the USB
memory device and software updating will fail.
1
Insert the USB memory device with the update fi le
into the USB terminal on the TV.
2
Press
a
/
b
on the Manual Update screen to select
"USB Update", and then press ENTER.
System software was successfully update.
OK
Press [Enter], the TV automatically turns off
and then turns on again.
Loading ...
Loading ...
Loading ...