Loading ...
Loading ...
Loading ...
5.
Turn both adjusting nuts an equal
number of turns until the correct drive
chain slack is obtained. Turn the adjusting
nuts clockwise to tighten the chain. Turn
the adjusting nuts counterclockwise to
provide more slack.
Adjust the slack at a point midway
between the drive sprocket and the
driven sprocket.
Check the drive chain slack. 2 P. 88
6.
Check rear axle alignment by making sure
the chain adjuster index marks align with
the rear edge of the adjusting slots.
Both marks should correspond.
If the axle is misaligned, turn the right or
left adjusting nuts until the marks are
aligned and recheck chain slack.
7.
Remove the bolts and muffler end cover.
8.
Tighten the rear axle nut.
Torque: 72 lbf·ft (98 N·m, 10.0 kgf·m)
9.
Install the muffler end cover and tighten
the bolts.
Torque: 7 lbf·ft (10 N·m, 1.0 kgf·m)
20171117172714_31MJF6300_enu_BOOK Page 93 Friday, November 17 2017 17:33:04 JST
Drive Chain u Adjusting the Drive Chain Slack
Maintenance
90
Bolts Muffler end cover
Loading ...
Loading ...
Loading ...