Loading ...
Loading ...
Loading ...
4.
Adjust the drive chain. 2 P. 89
5.
Remove the bolts and muffler end cover.
2 P. 90
6.
Install and tighten the rear axle nut.
Torque: 72 lbf·ft (98 N·m, 10.0 kgf·m)
7.
Install the muffler end cover and bolts.
2 P. 90
8.
Tighten the drive chain adjusting nuts
lightly, then hold the adjusting nuts and
tighten the lock nuts.
Torque: 15 lbf·ft (21 N·m, 2.1 kgf·m)
9.
After installing the wheel, apply the brake
pedal several times, then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
10.
Install the parking brake caliper and
tighten the mounting bolts.
Torque: 23 lbf·ft (31 N·m, 3.2 kgf·m)
u Take care to prevent the brake caliper
from scratching the wheel during
installation.
u
Use new mounting bolts when
installing the brake caliper.
NOTICE
When installing the brake caliper into position,
carefully fit the brake disc between the pads to
avoid scratching them.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
20171117172714_31MJF6300_enu_BOOK Page 112 Friday, November 17 2017 17:33:04 JST
Tire Puncture u Removing Wheels
Troubleshooting
109
Loading ...
Loading ...
Loading ...