Subaru 2019 WRX WRX Premium

User Manual - Page 158

For 2019 WRX WRX PREMIUM.

PDF File Manual, 512 pages, Read Online | Download pdf file

2019 WRX WRX PREMIUM photo
Loading ...
Loading ...
Loading ...
(162,1)
北米Model "A2550BE-B" EDITED: 2019/ 1/ 16
Ignition switch (models with-
out push-button start system)
S03AA
WARNING
. Never turn the ignition switch to
“LOCK” while the vehicle is being
driven or towed because that will
lock the steering wheel, prevent-
ing steering control. And when
the engine is turned off, it takes a
much greater effort than usual to
steer.
. Before leaving the vehicle, al-
ways remove the key from the
ignition switch for safety and
never allow an unattended child
to remain in the vehicle. Failure to
follow this procedure could re-
sult in injury to a child or others.
Children could operate the power
windows, the moonroof or other
controls or even make the vehicle
move.
CAUTION
Do not attach a large key holder or
key case to either key. If it banged
against your knees or hands while
you are driving, it could turn the
ignition switch from the “ON” posi-
tion to the “ACC” or “LOCK” posi-
tion, thereby stopping the engine.
Also, if the key is attached to a
keyholder or to a large bunch of
other keys, centrifugal force may act
on it as the vehicle moves, resulting
in unwanted turning of the ignition
switch.
The ignition switch has four positions:
LOCK, ACC, ON and START.
NOTE
. Keep the ignition switch in the
“LOCK” position when the engine is
not running.
. Using electrical accessories for a
long time with the ignition switch in the
“ON” or “ACC” position can cause the
battery to go dead.
. If the ignition switch will not move
from the “LOCK” position to the “ACC”
position, turn the steering wheel
slightly to the left and right as you turn
the ignition switch.
& LOCK
S03AA01
The key can only be inserted or removed in
this position. The ignition switch will lock
the steering wheel when you remove the
key.
If turning the key is difficult, turn the
steering wheel slightly to the right and left
as you turn the key.
The key can be turned from “ACC” to
“LOCK” only when the key is pushed in
while turning it (all models) and the select
lever is in the “P” position.
Instruments and controls/Ignition switch (models without push-button start system)
3-4
Loading ...
Loading ...
Loading ...