Loading ...
Loading ...
Loading ...
(136,1)
北米Model "A2550BE-B" EDITED: 2019/ 1/ 16
. Cargo area light (Outback)
The notifications regarding the map
lights, dome light and cargo area light
(Outback) are deactivated as the fac-
tory setting. A SUBARU dealer can
activate the system. Contact your
SUBARU dealer for details.
& Activating and deactivating
the alarm system
S02AF02
To change the setting of your vehicle’s
alarm system for activation or deactiva-
tion, do the following.
1. Disarm the alarm system. Refer to
“Disarming the system” F2-33.
2. Sit in the driver’s seat and shut all
doors (and the rear gate (Outback)).
3. Turn the ignition switch to the “ON”
position.
4. Hold down the REAR (UNLOCK) side
of the driver’s power door locking switch,
open the driver’s door within the following
1 second, and wait 10 seconds without
releasing the switch. The setting will then
be changed as follows:
If the system was previously activated:
The odometer screen displays “ALOF” and
the horn sounds twice, indicating that the
system is now deactivated.
If the system was previously deacti-
vated:
The odometer screen displays “ALON”
and the horn sounds once, indicating that
the system is now activated.
NOTE
You may have the above setting change
done by your SUBARU dealer.
& If you have accidentally trig-
gered the alarm system
S02AF03
! To stop the alarm
S02AF0301
Perform any of the following operations.
. Press any button on the access key fob/
remote transmitter.
. Turn the ignition switch to the “ON”
position (models without “keyless access
with push-button start system”).
. Turn the push-button ignition switch to
the “ACC” position (models with “keyless
access with push-button start system”).
NOTE
Only registered keys will stop the
alarm. If the key is not registered, the
alarm will not stop.
& Arming the system
S02AF04
NOTE
. The system can be armed even if the
windows and/or moonroof are open.
Always make sure that they are fully
closed before arming the system.
. When arming the system, if any of
the doors or the rear gate/trunk lid is
not fully closed, an electronic chirp
sounds five times, the hazard warning
flashers flash five times to alert you that
the doors (or the rear gate/trunk lid) are
not properly closed. When you close
the door, doors will automatically lock
and the system will automatically arm
in 30 seconds. However, the system will
not arm if the engine hood is open.
. The 30-second standby time can be
eliminated if you prefer. Have it per-
formed by your SUBARU dealer.
. For Legacy, if you open the trunk
using the access key fob/remote trans-
mitter’s “
” button in the surveillance
state (or the standby state), the system
will be temporarily placed in a standby
state. The system will go back to the
surveillance state in 30 seconds upon
locking the trunk.
. The system is in the standby state
for a 30-second period before arming
the system. The security indicator light
will flash at short intervals during this
Keys and doors/Alarm system
2-30
Loading ...
Loading ...
Loading ...