Loading ...
Loading ...
Loading ...
22
utomatic ignition with flame failure safety device
o ignite a burner:
o Press in the control knob of the
o If you keep the control knob
o You should hold down the control knob for 20 seconds after the
o After this 20 second interval, turn the control knob to your
o Once the burner is lit, turn the control knob to your required
o To turn the burner off, turn the control knob fully anti-clockwise
o In case of power failure, the burners can be lit by carefully using
nergy saving tips
PANS
A
T
burner that you wish to light and
turn it clockwise to the maximum
position.
depressed, the automatic ignition
for the burner will operate.
flame on the burner has lit.
required setting between the maximum and minimum setting
symbols.
setting between the maximum and minimum setting symbols.
to the gas off position.
a match.
E
BURNERS
Minimum
diametre
Maximum
diametre
Wok 220 mm 260 mm
Rapid 180 mm 260 mm
Semi-rapid
140 mm 260 mm
Auxiliary 120 mm 140 mm
o The diametre of the bottom of the pan should correspond to that
of the burner.
Loading ...
Loading ...
Loading ...