Loading ...
Loading ...
Loading ...
MAINTENANCE
REPLACING THE DRIVE BELT!"-#
Ensure that snow thrower is not plugged in.
Remove the 5 screws (1) that secure the left side plate (2) to the frame of the snow thrower.
Remove the side cover.
Remove the old belt (3) from the small pulley (5) and large pulley (4).
Loop one end of the new belt over the small pulley.
Rotate the impeller with the left hand while positioning the belt on the large pulley with the
right hand.
Install the left side cover, and secure it using the 5 screws that you previously removed.
22
Fig. 14
1
2
3
4
5
Loading ...
Loading ...
Loading ...