Loading ...
Loading ...
Loading ...
EFX5.19 Elliptical Fitness Trainer Assembly Guide 6
Slide the end cap into the ramp. Align the flanges on
the inside of the end cap with the two holes on the end
of the ramp, and then press firmly into place.
Thread the hex nut and height
adjuster into the base. Wrench
tighten the nut.
Attach both stabilizers to the upright support
bracket using eight hex head screws (D) and eight
washers (B). Finger tighten.
Attach the lower portion of both stabilizers to the base
frame using four hex head bolts (A), eight washers (B),
and four locknuts (C). Wrench tighten.
Return to the upright support bracket.
Wrench tighten the eight screws that
secure the stabilizers to the bracket.
Secure the upright support. Wrench
tighten the bolt holding the upright
support onto the base.
Loading ...
Loading ...