Loading ...
Loading ...
Loading ...
● Proverite da li je slavina za
dovod vode otvorena.
● Budite sigurni da je
odvodna cev na mestu.
BIRANJE PROGRAMA PRANJA
Pogledajte tebelarni
pregled programa kako
bi izabrali najprikladniji
program pranja.
Okrenite dugme
programatora na Ïeljeni
program da ga aktivirate.
Priãekajte da se upali
svetlosni indikator “Spin”
(centrifuga) Nakon ‰to ste
pritisli taster START ma‰ina
çe pode‰avati tok rada u
hodu.
Pri izvodjenju programa
pranja dugme programator
nepomiãno stoji na
odabranom programu sve
do kraja ciklusa pranja.
UPOZORENJE:
Ako dodje do prekida
elektriãne energije tokom
rada, posebna memorija çe
saãuvati ono ‰to ste
programirali, a kada se
elektriãna energija vrati,
ma‰ina çe zapoãeti sa
radom od mesta gde je
stala.
● Na kraju programa pranja
zasvetleçe svetlosni indikator
“kraj programa”.
● Nakon zavr‰etka
programa pranja saãekajte
oko 2 minuta da sigurnosni
uredjaj "otkljuãa" vrata.
Iskljuãite ma‰inu okretanjem
dugmeta programatora na
poloÏaj OFF (iskljuãeno).
● Otvorite vrata i izvadite
ve‰.
ZA SVE VRSTE PRANJA
POTRAÎITE UPUTSTVA U
TABELARNOM PRIKAZU
PROGRAMA I SLEDITE
POSTUPKE PRIKAZANIM
REDOM
● Ensure that the water inlet
tap is turned on.
● And that the discharge
tube is in place.
PROGRAMME SELECTION
Refer to the programme
guide to select the most
suitable programme.
Turning the selector knob
required programme is
activate.
Wait that a “Spin” indicator
light will go on.
Then press the START button.
When the START button is
pressed the machine sets
the working sequence in
motion.
The programme carries out
with the programme
selector stationary on the
selected programme till
cycle ends.
Warning: If there is any break
in the power supply while
the machine is operating, a
special memory stores the
selected programme
and,when the power is
restored, it continues where
it left off.
● At the end of the
programme all the wash
stage indicator lights will
illuminate .
● Wait for the door lock to
be released (about 2
minutes after the
programme has finished).
● Switch off the machine by
turning the programme
selector to the “OFF”
position.
● Open the door and
remove the laundry.
FOR ALL TYPES OF
WASH CONSULT THE
PROGRAMME TABLE
AND FOLLOW THE
OPERATIONS IN THE
ORDER INDICATED.
EN
SRB
EN
● Ensure that the water inlet
tap is turned on.
● And that the discharge
tube is in place.
PROGRAMME SELECTION
Refer to the programme guide
to select the most suitable
programme.
Turning the selector knob
required programme is
activate.
The display will show the
settings for the programme
selected.
Press the option buttons (if
required)
Then press the START button.
When the START button is
pressed the machine sets the
working sequence in motion.
The programme carries out
with the programme selector
stationary on the selected
programme till cycle ends.
Warning: If there is any break
in the power supply while the
machine is operating, a
special memory stores the
selected programme
and,when the power is
restored, it continues where it
left off.
● When the programme has
ended the word “End” will
appear on the display
● Wait for the door lock to be
released (about 2 minutes
after the programme has
finished).
● Switch off the machine by
turning the programme
selector to the “OFF” position.
● Open the door and remove
the laundry.
● Turn off the water supply
after every use.
FOR ALL TYPES OF
WASH CONSULT THE
PROGRAMME TABLE
AND FOLLOW THE
OPERATIONS IN THE
ORDER INDICATED.
● Prepriãajte se, da je pipa
za dotok vode odprta.
● Preverite, da je cev za
odtok vode pravilno
name‰ãena.
IZBIRANJE PROGRAMOV
Upo‰tevajte navodila v
razpredelnici programov in
izberite najustreznej‰i
program. Obrnite gumb
programatorja na izbrani
program.
Na prikazovalniku so vidne
nastavitve za izbrani
program.
Po potrebi izberite opcije s
pomoãjo ustreznih tipk.
Nato pritisnite na tipko START;
stroj zaãne izvajati program.
Gumb programatorja se med
izvajanjem programa ne
obraãa.
Opozorilo: âe med
delovanjem stroja zmanjka
elektriãne energije, se izbrani
program shrani v spomin in ko
je stroj spet pod napetostjo,
nadaljuje z izvajanjem
programa.
● Ko je program zakljuãen, se
na prikazovalniku prikaÏe
napis “End” (Konec).
● Ko je program zakljuãen,
poãakajte pribl. 2 minuti, da
se sprosti zapah vrat.
● Izklopite stroj z obraãanjem
gumba programatorja na
OFF.
● Odprite vrata stroja in
poberite perilo iz bobna.
● Po vsaki uporabi stroja
zaprite pipo za vodo.
PRED IZBIRO PROGRAMA
ZA PRANJE POSAMEZNIH
VRST PERILA PREGLEJTE
RAZPREDELNICO
PROGRAMOV TER
UPO·TEVAJTE ZGORAJ
NAVEDENI VRSTNI RED
OPRAVIL.
SL
● Proverite da li je slavina za
dovod vode otvorena.
● Budite sigurni da je
odvodna cev na mestu.
BIRANJE PROGRAMA PRANJA
Prema uputstvu za
kori‰çenje odaberite
najprikladniji program.
Okretanjem dugmeta
podesite Ïeljeni program çe
se pokrenuti. Na displeju çe
se prikazati postavke
odabranog programa.
Pritisnite opcionu dugmad
(ako Ïelite). Nakon ‰to
pritisnite dugme START
ma‰ina çe poãeti da
izvr‰ava program.
Pri izvodjenju programa
pranja dugme programator
nepomiãno stoji na
odabranom programu sve
do kraja ciklusa pranja.
UPOZORENJE:
Ako dodje do prekida
elektriãne energije tokom
rada, posebna memorija çe
saãuvati ono ‰to ste
programirali, a kada se
elektriãna energija vrati,
ma‰ina çe zapoãeti sa
radom od mesta gde je
stala.
● Kada se program zavr‰i,
na displeju çe se prikazati
reã “END”.
● Nakon zavr‰etka
programa pranja saãekajte
oko 2 minuta da sigurnosni
uredjaj "otkljuãa" vrata.
Iskljuãite ma‰inu okretanjem
dugmeta programatora na
poloÏaj OFF (iskljuãeno).
● Otvorite vrata i izvadite ve‰.
● Zavrnite slavinu za dovod
vode nakon svakog
kori‰çenja.
ZA SVE VRSTE PRANJA
POTRAÎITE UPUTSTVA U
TABELARNOM PRIKAZU
PROGRAMA I SLEDITE
POSTUPKE PRIKAZANIM
REDOM
SRB
EN
● Ensure that the water inlet
tap is turned on.
● And that the discharge
tube is in place.
PROGRAMME SELECTION
Refer to the programme guide
to select the most suitable
programme.
Turning the selector knob
required programme is
activate.
The display will show the
settings for the programme
selected.
Press the option buttons (if
required)
Then press the START button.
When the START button is
pressed the machine sets the
working sequence in motion.
The programme carries out
with the programme selector
stationary on the selected
programme till cycle ends.
Warning: If there is any break
in the power supply while the
machine is operating, a
special memory stores the
selected programme
and,when the power is
restored, it continues where it
left off.
● When the programme has
ended the word “End” will
appear on the display
● Wait for the door lock to be
released (about 2 minutes
after the programme has
finished).
● Switch off the machine by
turning the programme
selector to the “OFF” position.
● Open the door and remove
the laundry.
● Turn off the water supply
after every use.
FOR ALL TYPES OF
WASH CONSULT THE
PROGRAMME TABLE
AND FOLLOW THE
OPERATIONS IN THE
ORDER INDICATED.
31
● Proverite da li je slavina za
dovod vode otvorena.
● Budite sigurni da je
odvodna cev na mestu.
BIRANJE PROGRAMA PRANJA
Pogledajte tebelarni
pregled programa kako
bi izabrali najprikladniji
program pranja.
Okrenite dugme
programatora na Ïeljeni
program da ga aktivirate.
Priãekajte da se upali
svetlosni indikator “Spin”
(centrifuga) Nakon ‰to ste
pritisli taster START ma‰ina
çe pode‰avati tok rada u
hodu.
Pri izvodjenju programa
pranja dugme programator
nepomiãno stoji na
odabranom programu sve
do kraja ciklusa pranja.
UPOZORENJE:
Ako dodje do prekida
elektriãne energije tokom
rada, posebna memorija çe
saãuvati ono ‰to ste
programirali, a kada se
elektriãna energija vrati,
ma‰ina çe zapoãeti sa
radom od mesta gde je
stala.
● Na kraju programa pranja
zasvetleçe svetlosni indikator
“kraj programa”.
● Nakon zavr‰etka
programa pranja saãekajte
oko 2 minuta da sigurnosni
uredjaj "otkljuãa" vrata.
Iskljuãite ma‰inu okretanjem
dugmeta programatora na
poloÏaj OFF (iskljuãeno).
● Otvorite vrata i izvadite
ve‰.
ZA SVE VRSTE PRANJA
POTRAÎITE UPUTSTVA U
TABELARNOM PRIKAZU
PROGRAMA I SLEDITE
POSTUPKE PRIKAZANIM
REDOM
SRB
● Ensure that the water inlet
tap is turned on.
● And that the discharge
tube is in place.
PROGRAMME SELECTION
Refer to the programme
guide to select the most
suitable programme.
Turning the selector knob
required programme is
activate.
Wait that a “Spin” indicator
light will go on.
Then press the START button.
When the START button is
pressed the machine sets
the working sequence in
motion.
The programme carries out
with the programme
selector stationary on the
selected programme till
cycle ends.
Warning: If there is any break
in the power supply while
the machine is operating, a
special memory stores the
selected programme
and,when the power is
restored, it continues where
it left off.
● At the end of the
programme all the wash
stage indicator lights will
illuminate .
● Wait for the door lock to
be released (about 2
minutes after the
programme has finished).
● Switch off the machine by
turning the programme
selector to the “OFF”
position.
● Open the door and
remove the laundry.
FOR ALL TYPES OF
WASH CONSULT THE
PROGRAMME TABLE
AND FOLLOW THE
OPERATIONS IN THE
ORDER INDICATED.
EN
Loading ...
Loading ...
Loading ...