Loading ...
Loading ...
Loading ...
75
• Color - always represents picture in color, does not use IR or black and white mode. Performs poorly in dimly lit areas
unless you are using the Starlight series cameras.
• Auto - Uses D&N Sensitivity setting to change between color mode and infrared and black and white mode.
• Black & White - Always sets picture to black and white, however when illumination is too dark it switches on IR mode.
• Sensitivity: This option allows the user to change the Day/Night Sensitivity of the camera. The three options are Low,
Middle, and High. The higher the sensitivity, the quicker the camera will change into another mode depending on the
light levels.
• D&N Delay: This dropdown box allows the user to set a delay in seconds for how long it takes to switch between Day
and Night modes. The values range from 2 seconds to 10 seconds.
To reset to default settings, click the Reset Defaults button. To refresh the screen, click on Refresh. To save the
settings, click the Save button.
Profile Management
Below is a screenshot that shows the Profile Management tab in the Configuration menu item:
Below is an explanation for each of the fields on the Profile Management tab in the Configuration menu item:
• Profile Management: This set of radio buttons allow the user to set what basis the profile management settings run on.
There are 3 options: Normal, Full Time, and Schedule. Normal means that the system can automatically alternate
between night and day based on the profiles for each.
Full Time means that the system sticks to one profile the entire time it is running. Schedule allows the user to dictate
which times of the day are designated for the day profile and the night profile.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save the
settings, click the Save button.
Video
This section allows the user to change video settings for the camera’s video feed. There are 4 tabs in this menu item:
Video, Snapshot, Overlay, and Path.
Loading ...
Loading ...
Loading ...