BP556 User Manual

Loading ...

System Setting26

System Setting

[AUDIO] menu

Each disc has a variety of audio output options. Set the

player’s Audio options according to the type of audio

system you use.

Since many factors affect the type of audio output,

see “Audio Output Specications” on page 58 for

details.

Note

Digital Output

[Auto]

Select if you connect this unit’s DIGITAL AUDIO OUT

and HDMI OUT jack to a device with LPCM, Dolby

Digital, Dolby Digital Plus, Dolby TrueHD, DTS and

DTS-HD decoder.

[PCM]

Select if you connect this unit’s HDMI OUT jack to a

device with digital decoder or DIGITAL AUDIO OUT

jack to a device with two channel digital stereo

decoder.

[DTS Re-Encode]

Select if you connect this unit’s HDMI OUT or DIGITAL

AUDIO OUT jack to a device with DTS decoder.

When [Digital Output] option is set to [Auto], the

audio may output as bitstream. If the bitstream

information is not detected from HDMI device

with EDID, the audio may output as PCM.

If the [Digital Output] option is set to [DTS Re-

Encode], the DTS Re-Encode audio is outputted

for BD-ROM discs with secondary audio and the

original audio is outputted for the other discs (like

[Auto]).

Note

Sampling Freq.

(Digital Audio Output)

[48 kHz]

Select this if your A/V Receiver or Amplier is not

capable of handling 192 kHz and 96 kHz signal.

When this choice is made, this unit automatically

converts any 192 kHz and 96 kHz signals to 48 kHz

so your system can decode them.

[96 kHz]

Select this if your A/V Receiver or Amplier is not

capable of handling 192 kHz signals. When this

choice is made, this unit

automatically converts any 192 kHz signals to 96

kHz so your system can decode them.

[192 kHz]

Select this if your A/V Receiver or Amplier is capable

of handling 192 kHz signals.

Check the documentation for your A/V Receiver or

Amplier to verify its capabilities.

DRC (Dynamic Range Control)

This function allows you to listen to a movie at a

lower volume without losing clarity of sound.

[Auto]

The dynamic range of the Dolby TrueHD audio output

is specied by itself.

And the dynamic range of the Dolby Digital and Dolby

Digital Plus are operated as same as the [On] mode.

[On]

Compress the dynamic range of the Dolby Digital,

Dolby Digital Plus or Dolby TrueHD audio output.

[Off]

Turns off this function.

The DRC setting can be changed only when a

disc is not inserted or the unit is in complete

stop mode.

Note

Loading ...

User Manual - Page 26