Loading ...
Loading ...
Loading ...
en Troubleshooting
32
Fault Cause troubleshooting
Automatic Super freezing
does not switch on.
Not a fault. The appliance
decides independently
whether automatic Super
freezing is required, and
switches it on or off automat-
ically.
No action required.
HomeConnect is not work-
ing correctly.
Different causes are pos-
sible.
▶
Go to www.home-connect.com.
The base of the refrigerator
compartment is wet.
The condensation channel
or drainage hole are
blocked.
▶
"Clean the condensation channel
and the drainage hole." →Page30
Information on display panel
Fault Cause troubleshooting
or appears in the tem-
perature display.
The electronics have detec-
ted a fault.
▶
Call the after-sales service.
→"Customer Service", Page36
The temperature display
(freezer compartment)
flashes.
The temperature in the
freezer compartment was
too warm.
1. Press .
a The temperature display (freezer
compartment) briefly indicates the
warmest temperature reached in
the freezer compartment. The tem-
perature display (freezer compart-
ment) then indicates the set tem-
perature again.
2. Press .
a The temperature display (freezer
compartment) no longer flashes.
The temperature display
(freezer compartment)
flashes, a warning signal
sounds and lights up.
Different causes are pos-
sible.
▶
Press .
a The alarm is switched off.
The appliance door is open.
▶
Close the appliance door.
The ventilation openings are
covered up.
▶
Remove any obstructions from in
front of the ventilation openings.
Larger quantities of fresh
food have been put in.
▶
Do not exceed the max. freezing ca-
pacity.
→"Freezing capacity", Page26
Loading ...
Loading ...
Loading ...