Loading ...
Loading ...
Loading ...
en HomeConnect
24
Installing the Home Connect
software update
The appliance searches for updates
to the HomeConnect software at reg-
ular intervals.
Note:If updates are available, the
temperature display (refrigerator
compartment) shows .
To reset the update and the temper-
ature display (refrigerator compart-
ment) to the set temperature, press
any touch field.
1. Press .
a The temperature display (refriger-
ator compartment) shows .
2. Press / (Refrigerator compart-
ment) repeatedly until the temper-
ature display (refrigerator compart-
ment) shows and the temperat-
ure display(freezer compartment)
shows .
3. Press / (Freezer compartment).
a The temperature display (freezer
compartment) shows an animation.
a The update is installed.
a The controls are locked during the
installation.
a If the installation is successful, the
temperature display (freezer com-
partment) shows .
4. If the temperature indicator (freezer
compartment) shows , the appli-
ance was unable to install the up-
date.
‒ Repeat the process at a later
point.
5. If the update cannot be completed
after several attempts, contact the
"After-sales service " →Page36.
Resetting HomeConnectset-
tings
If your appliance experiences con-
nection problems with the WLAN
home network (Wi-Fi) or your appli-
ance wants to log into a different
WLAN home network (Wi-Fi), you can
reset the HomeConnectsettings.
1. Press .
a The temperature display (refriger-
ator compartment) shows .
2. Press / (Refrigerator compart-
ment) repeatedly until the temper-
ature display (refrigerator compart-
ment) shows and the temperat-
ure display(freezer compartment)
shows .
3. Press / (Freezer compartment).
a The temperature display (freezer
compartment) shows an animation
for 15seconds.
a The temperature display (freezer
compartment) then shows .
a The HomeConnectsettings have
been reset.
Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the HomeConnect
server (initial registration):
¡ Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
¡ Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
¡ The current software and hardware
version of your appliance.
¡ Status of any previous reset to
factory settings.
This initial registration prepares the
HomeConnect functions for use and
is only required when you want to
use the HomeConnect functions for
the first time.
Loading ...
Loading ...
Loading ...