Loading ...
Loading ...
Loading ...
03/21/2023Page 18 of 76
TRUE RESIDENTIAL
®
P#212530
PAGE TITLE
TEC_TM_009 | REV. I | EN
INSTALLATION
WATER FILTER INSTALLATION &
PERFORMANCE DATA
The water filter filters sediment and removes
unpleasant taste and odor. Install the provided water
filter before using the icemaker. The unit will not make
ice until the water filter is installed.
PROCEDURE
1. Remove the kickplate. See fig. 1.
2. Insert the provided water filter (see fig. 2) and
rotate the filter clockwise. (See figs. 3 and 4).
3. Reinstall the kickplate.
WATER FILTER PERFORMANCE DATA
• This system has been tested according to NSF/ANSI
Standard 42, 53, 372, 401, P473 and CSA B483.1
for reduction of the substances listed below. The
concentration of the indicated substances in water
entering the system was reduced to a concentration
less than or equal to the permissible limit for
water leaving the system, as specified in NSF/
ANSI Standards 42, 53, 372, 401, P473 and CSA
B483.1.
• Systems certified for cyst reduction may be used
on disinfected waters that may contain filterable
cysts. The system conforms to NSF/ANSI 42, 53,
372, 401,P473 and CSA B483.1 for the specific
performance claims as verified and substantiated
by test data. Conforms to NSF/ANSI 53 for VOC
reduction. See below for individual contaminants
and reduction performance.
NOTE: TESTING WAS PERFORMED UNDER
STANDARD LABORATORY CONDITIONS,
ACTUAL PERFORMANCE MAY VARY.
FIG. 4.
Installed water filter.
FIG. 3.
Insert the water filter and rotate it clockwise.
FIG. 2.
Locate the provided water filter shipped in the ice bucket.
FIG. 1.
Pull the kickplate from the cabinet.
Loading ...
Loading ...
Loading ...