Loading ...
Loading ...
Loading ...
60
SMART FUNCTIONS
SIGNATURE KITCHEN SUITE
Application Features
SpeedClean™
Allows you to set SpeedClean™ alerts, read the
instruction guide, and simulate and compare energy
consumption when using SpeedClean™ versus self-
clean cycles.
Smart Diagnosis™
This function provides useful information for
diagnosing and solving issues with the appliance
based on the pattern of use.
Settings
Change oven settings, including the hour mode,
preheat alarm light, beeper volume, temperature
units, convection auto conversion, thermostat
adjustment and language.
Remote Start
Turn off the oven or start the oven preheating
remotely. Open and close the oven door, then select
Remote Start in the Settings menu on the display
within 30 seconds.
Monitoring
See the current status for the range, remaining
cooking time, cook settings, and end cooking time.
Push Alert
Turn on alerts in the app to receive notifications about
the current status of the appliance. Push alerts are
sent even if the SIGNATURE KITCHEN SUITE app is
off.
Timer
Set the timer from the app.
NOTE
•
If you change your wireless router, Internet
service provider, or password, delete the
registered appliance from the SIGNATURE
KITCHEN SUITE application and register it
again.
•
This information is current at the time of
publication. The application is subject to change
for product improvement purposes without
notice to users.
Smart Diagnosis™ Function
Should you experience any problems with the
appliance, it has the capability of transmitting data via
your telephone to the SIGNATURE KITCHEN SUITE
Customer Information Center. NFC or Wi-Fi equipped
models can also transmit data to a smartphone using
the SIGNATURE KITCHEN SUITE application.
Smart Diagnosis™ through the
Concierge Service
This method allows you to speak directly to our
trained specialists. The specialist records the data
transmitted from the appliance and uses it to analyze
the issue, providing a fast and effective diagnosis.
1
Call the SIGNATURE KITCHEN SUITE
Concierge Service at 1-855-790-6655.
2
Touch SETTINGS, located at the center bottom
of the main display screen. Swipe to the third
settings screen and select Smart Diagnosis™.
Follow the instructions in the display.
NOTE
Do not touch any other buttons or icons on the
display screen.
3
Touch Start.
4
Keep the phone in place until the tone
transmission has finished. This takes about 6
seconds and the display will count down the
time.
5
Once the countdown is over and the tones have
stopped, resume your conversation with the
call agent, who will then be able to assist you in
using the information transmitted for analysis.
NOTE
•
For best results, do not move the phone while
the tones are being transmitted.
•
If the agent is not able to get an accurate
recording of the data, you may be asked to try
again.
Loading ...
Loading ...
Loading ...