Loading ...
Loading ...
Loading ...
4
1. Press down on the button located on top of Pod Drawer
handle and pull Pod Drawer out along the Drawer Guides.
2. Place coffee or tea pod in Pod Drawer cavity.
Center pod in holder and gently press the pod completely into the
Pod Drawer cavity. Ensure that pod is fully seated.
3. Slide Pod Drawer into Drawer Guides and push in to lock
into place.
Pod Drawer must be locked into place before brewer will operate.
4. Open Spin Lid on top of brewer.
5. Using your preferred cup, fill Pour-In-Bowl with desired
amount of water (minimum 4 oz., maximum 14 oz.).
Note: the cup positioned on Drip Tray and under the Pod Drawer
must be larger than the amount of water used.
6. Close Spin Lid on top of brewer and position cup on
Drip Tray under Pod Drawer.
Note: be sure cup is heat resistant.
7. For regular brew, push the Brew Button.
For bolder brew or for tea, push the Pulse Button to set the pulse
feature and then push the Brew Button.
8. At end of brew cycle, remove cup from Drip Tray.
Dispose of used pod by removing the Pod Drawer (see #1) and
flipping the pod into a waste container. Do not touch hot pod!
BREWING BETTER
5
BREWING BETTER
MY CAFÉ
®
SINGLE SERVE POD BREWER WITH PODS
• Use My Café to dispense hot water for hot cocoa and other beverages. Just leave the pod
or tea bag out of the Pod Drawer and press Brew. Use caution, the dispensed water will be
approximately 200°F.
• Brew iced coffee and tea by brewing over a cup filled with ice (make sure cup is resistant
to both hot and cold). After brewing, add milk and/or your favorite sweetener.
MORE BEVERAGES
• After 6 hours idle, the temperature inside the stainless steel hot water tank drops to 140°F.
It takes about 1 minute to get back to an optimal brewing temperature of about 200°F.
• After 26 hours idle, My Café enters sleep mode. It takes about 2 minutes to return to
optimal brewing temperature (about 200°F).
• When Pod Drawer is removed or inserted, or if any button is pushed, the brewer exits
energy saver/sleep mode and begins to heat up to optimal brewing temperature. When
the indicator light is green, your brewer is ready to use.
ENERGY SAVING FUNCTIONS
The My Café
®
Single Serve Pod Brewer precisely controls brewing temperature and
time to extract superior flavor from your favorite coffee and tea pods. Pods typically
range in weight from 6 to 12 grams or more, so experiment with different amounts of
water and a variety of pod weights to create your perfect cup.
• Start with your favorite pod and 8 ounces of water.
• For a bolder cup, use less water or a heavier pod.
• For a weaker cup, use more water or a lighter pod (it contains less coffee) with the same
amount of water.
note: Too much water and too little coffee can lead to over-extraction of the grounds
and a bitter taste.
• Use the Pulse Button to steep tea pods or for bolder coffee flavor.
For more information on pods, visit mycafe.com
Loading ...
Loading ...
Loading ...