Loading ...
Loading ...
2
IMPORTANT SAFEGUARDS
keep this booklet for future reference
Record the Date Code before using (located
on the lower back of your brewer).
date code:
Questions?
Visit www.bunn.com or call
USA 1-800-352-BUNN (2866)
Canada 1-800-263-2256
Please have your Model and Date Code
ready when calling for service.
Follow basic safety precautions when using electrical appliances to reduce the risk of fire,
electric shock, and/or personal injury:
Your My Café is now heating the water. Wait 2 to 3 minutes for the indicator light to turn
from red to green. You are now ready to brew!
note: The short power-supply cord supplied reduces the risk of becoming entangled in or tripping
over a longer cord. If an extension cord is used, its marked electrical rating must be at least as great
as the electrical rating of the brewer. Make sure the extension cord does not hang over the edge of a
table or counter and that it cannot be pulled on by children or tripped over. The extension cord must
be a 3-wire cord of the 3-prong, 3-socketed, grounding type (including grounding conductor).
• READ ALL INSTRUCTIONS.
• Do not touch hot surfaces. Use handles.
• Do not place cord, plugs, or brewer in
water or other liquids.
• Do not open lid during brewing.
• Close supervision is necessary when
brewer is used by or around children.
• Unplug brewer when not in use for
extended periods and before cleaning.
Let brewer cool before removing or
replacing parts, and before cleaning.
• Do not operate brewer with a damaged
cord or plug or if the brewer malfunctions
or is damaged in any way. Return brewer
to an Authorized Service Facility for
examination, adjustment or repair (see
page 9).
• Using an accessory not evaluated for use
with this brewer may cause injury.
• For indoor household use only.
• Do not let cord hang over edge of table
or counter or touch hot surfaces.
• Do not place brewer on or near a hot gas
or electric burner or in a heated oven.
• Do not use brewer for any purpose other
than its intended use.
• Do not insert or remove Pod Drawer
while brewing. Press brew button to stop
or cancel a brew cycle.
• Do not pour any liquid into the water tank
other than water or vinegar for cleaning,
as specified in this manual.
• Do not clean brewer with cleansers, steel
wool pads, or other abrasive materials.
• When brewer is not in use, keep lid in the
closed position.
• To avoid cup overflow, empty cup before
each brew cycle.
• Never place hands directly under Pod
Holder. Hot water and steam can be
present.
• Always use a cup that is larger than the
amount of water poured into the brewer.
• Keep hands away if cup overflows.
• Pour in cold water only.
• Do not place torn pods, coffee grounds or
loose tea in Pod Drawer.
• Do not place objects in Pod Drawer other
than coffee or tea pods or tea bags.
This symbol alerts
you to important
operating and
service instructions.
This symbol alerts
you to the risk of fire
or electric shock in the
accompanying message.
TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK
DO NOT DISASSEMBLE THE BREWER
NO USER-SERVICEABLE PARTS INSIDE
REPAIR SHOULD BE DONE BY AUTHORIZED
SERVICE PERSONNEL ONLY
WARNING
RISK OF FIRE OR ELECTRICAL SHOCK
3
SETTING UP
important: My Café has an internal hot water tank that must be filled with water before brewing.
Fill the Pour-in Bowl and run 2-3 brew cycles. The machine will begin to heat and be ready to brew.
MY CAFÉ
®
SINGLE SERVE POD BREWER
1. Plug in brewer. The Brew Button will
flash red, indicating that water is needed
and the brewer is ready for set-up.
2. Position cup (14 oz. or larger) on
Drip Tray under Pod Drawer.
Do not brew directly into untempered
glass or plastic cups/glasses. Use only
heat-resistant vessels.
3. Place empty Pod Drawer into
Drawer Guides and push in to
lock into place. The Pod Drawer must
be locked into place before brewer
will operate.
4. Fill a container with 14 oz. of
cold water.
5. Open Spin Lid on top of brewer.
6. Fill Pour-in Bowl with water.
7. Close Spin Lid.
8. Push Brew Button. Wait approximately
two minutes for the internal hot water
tank to partially fill with water. You may
hear some squeaking as the pump primes.
This is perfectly normal and will only occur
during setup.
9. Empty cup if any water is present,
then place cup on Drip Tray under
Pod Drawer.
10. Repeat steps 4 through 7.
11. Push Brew Button. Wait about
2 minutes for internal hot water tank
to finish filling with water. Excess water
will fill the cup. If the Brew Button is still
flashing red, repeat steps 4 through 7
and push Brew Button again.
Loading ...
Loading ...
Loading ...