Loading ...
Loading ...
Loading ...
Tighten the screws you removed in step 3.
(Make sure it is fixed hardly.)
7
Close the lamp cover and install the screws from step 2 to install the cover.
(If the lamp cover is not installed correctly the unit will not power on.)
8
Using another manufacturers lamp may cause damage to the projector or lamp.
Make sure the lamp cover is securely fastened. If the lamp cover is not installed correctly the unit will not power on.
If this fault persists contact an LG Authorized Service Center.
* You must reset lamp time on the menu after replacing the lamp.
Press the
◉
OK
button on the projector and
◉
OK
button on the remote control
simultaneously (About 5 seconds).
1
Press the
◉
OK
button on the projector or
◉
OK
button on the remote control.
Lamp time will be reset.
2
Reset Lamp Time
Reset Lamp Time
Lamp Time Reset
Lamp Use Time[hh] 3009
Total Lamp Use Time[hh] 3009
Lamp Time Reset Counter 1
Lamp Time Reset Press OK to Reset
Reset[OK KEY] Exit[MENU KEY]