Loading ...
Loading ...
Replacing the Lamp
Replacing the Lamp
Turn off the projector and unplug the power cable.
Carefully place on a cushioned surface.
(Allow the lamp to cool for 1 hour before
removing the used lamp from the projector.)
1
Unscrew the screw from the lamp cover using a
screwdriver.
2
After lifting the lamp cover off, remove the two
retaining screws on the lamp case with a screwdriver.
3
Lift up the fixed wire knob on the lamp.
4
Pull out the handle slowly and remove the lamp case.
5
Insert the new lamp gently into the correct position.
Make sure it is inserted correctly.
6
Lamp case screw
Screws
Knob
bottom
Loading ...