Loading ...
Loading ...
Loading ...
USING YOUR REFRIGERATOR
REPLACING THE WATER FILTER
It is recommended that you replace the filter
when the water filter indicator light turns on or
the water dispenser or icemaker noticeably
decreases production.
NOTE: Filter Bypass Plug
Keep the filter bypass plug.
You must use the filter bypass plug when a
replacement filter cartridge is not available.
The icemaker will not operate without the filter or
filter bypass plug inserted in the proper
compartment.
1. Slowly turn the old cartridge to the left. When
the cartridge is released, you will feel it click
out of place.
NOTE: Replacing the filter causes a small
amount of water (around 1 oz. or 25 cc) to drain.
2. Remove the old cartridge. Take the new
cartridge out of its packaging, and remove the
red cap. Line up the cartridge ears so that it
can be inserted into the filter head.
3. Twist the cartridge right about 1/4 turn.
You will feel a stop and the locked symbol
should now be lined up with the indicator line.
After replacing the filter, flush 2.5 gallons through
filter before use (flush for approximately 5
minutes). Check the filter for leaks.
After changing the filter, press and hold the
FILTER button for 3 seconds to turn the indicator
light off.
To purchase replacement water filter cartridges,
visit your local appliance dealer or parts
distributor.
You can also call 1300 542 273 (Australia),
0800 542 273 (New Zealand).
The replacement water filter cartridge’s part
number is 5231JA2002A.
28
Seperation
of
Red Cap
Loading ...
Loading ...
Loading ...