Loading ...
Loading ...
Loading ...
12 EN
4 Use your
product
This section helps you use this product
to play media from a wide range of
sources.
Before you start
• Make the necessary connections
described in Quick start guide and
User manual.
• Switch this product to the correct
source for the other devices.
Set clock
Through clock setting, you may select a
type of standby (ECO standby without
clock display, or normal standby with
clock display ).
1 Switch this product to standby
(press
).
» --:-- (or clock) is displayed.
2 Press and hold to activate the
clock setting mode.
» --:-- blinks.
3 Press Volume +/- to select 12 hour
or 24 hour format, then press
to
conrm.
• If 12 hour format is selected, then
select AM or PM for display.
» The hour digits begin to blink.
4 Press Volume +/- to set the hour,
then press
to conrm.
» The minute digits begin to blink.
5 Press Volume +/- to set the minute,
then press
to conrm.
» ECO begins to blink.
6 Press Volume +/- to select “ECO” or
“CLOCK”, then press
to conrm.
» If you select “ECO” , in standby,
the clock is displayed for
1 minute then the display is
switched o.
» If you select “CLOCK”, in
standby, the clock is always
displayed.
View clock
1 In ECO standby or operation mode,
press
.
» In ECO standby mode, the clock
is displayed for 1 minute, then
the display is switched o.
» In operation mode, the clock is
displayed 5 seconds, then the
display is switched to the current
source information.
Note
•
If AC power is disconnected, the clock time
can only be retained for 24 hours.
• Extreme room temperature aects clock
accuracy.
Auto standby
When playing media from a connected
device, this product automatically
switches to standby after 15 minutes of
button inactivity and no audio/video
play from a connected device.
Adjust the volume
1
Press Volume +/- to increase or
decrease a volume level.
• To mute sound, press
.
• To restore the sound, press
again or press Volume +/-.
Loading ...
Loading ...
Loading ...