Loading ...
Loading ...
Loading ...
6 English English 6
English 7
1
1
2
2
3
3
4
4
1. 2.0 CH Speaker Connector Terminals
(MX-E630CB only)
2.1 CH Speaker Connector Terminals
(MX-E650CB only)
The speaker connector terminals are located on
the rear of the system.
1.
To achieve the correct sound quality, insert
the speaker connector cables identified
below into the correct speaker terminals on
the back of the system.
• Leftspeaker(markedL).
• Rightspeaker(markedR).
• SUBWOOFERspeaker:MX-E650CBonly.
2. ONLY FOR SERVICE
• Thisjackisforserviceonly.Pleasedonot
use.
3. AUX IN Terminals
1.
Use an Audio Cable (not supplied) to con-
nect AUX IN on the product to Audio Out on
an external analog component.
• Besuretomatchconnectorcolors.
• Iftheexternalanalogcomponenthasonly
oneAudioOutjack,connecttoeither
theleftorrightterminal.
• PresstheTUNER/AUXbuttontoselectthe
AUXinput.
• YoucanalsoselectAUXbypressingthe
FUNCTIONbuttonontheremotecontrol.
4. FM Antenna Connector Terminal
1.
Connect the FM antenna (supplied) to the
FM Antenna jack.
2.
Slowly move the antenna wire around until
you find a location where reception is
good, then fasten it to a wall or other rigid
surface.
3.
If reception is poor, you may need to install
an outdoor antenna. To do so, connect an
outdoor FM antenna to the FM socket on
the rear of the system using a 75Ω coaxial
cable (not supplied).
Rear Panel
MX-E630CB
MX-E650CB
MX-E630CB-E650CB-ENG-XAA-0710.indd 7 2012-7-10 10:49:11
Loading ...
Loading ...
Loading ...