Loading ...
Loading ...
Loading ...
13INSTALLATION
ENGLISH
CAUTION
• Keep fingers away from pinch points when
assembling the appliance or the charging
station.
NOTE
• The charging station can be removed as needed.
To remove it, hold the floor stand dock steady
and pull up on the charging station.
1 Place the floor stand dock on a hard and level
floor and assemble the floor stand pipe.
2 Clip the power cord tidily into the cord keeper
a on the back of the floor stand pipe.
3 Assemble the charging station onto the top of
the floor stand pipe.
4 Connect the power adapter to the port on the
back of the charging station.
5 Drill a hole in the wall and insert the drywall
anchor b if needed.
• Before drilling, make sure that there are no
pipes or electrical wires inside the wall at
the desired location.
• For drywall anchor: use 1/4″ (6.5 mm) drill
bit
• For concrete or wall stud: use 1/8″ (3 mm)
drill bit
• If screwing into drywall, use the drywall
anchor.
6 Align the wall anchoring block c of the
charging station, and fix the charging station
to the wall by tightening the anchoring screw
d all the way.
us_main.book.book Page 13 Tuesday, March 16, 2021 10:31 AM
Loading ...
Loading ...
Loading ...