User Manual Seagate ST4000DMZ04/DM004 BarraCuda 4TB Internal Hard Drive HDD

Documents for Seagate ST4000DMZ04/DM004

User Manual

For ST4000DMZ04/DM004. Also, The document are for others Seagate models: ST3000DM008, ST2000DM006, ST1000DM010, ST500DM009, ST3000DM009, ST2000DM007

• Seagate® Technology Support Services6
• 1.0 Introduction7
  • 1.1 About the SATA interface8
• 2.0 Drive Specifications9
  • 2.1 Specification summary tables9
  • 2.2 Formatted capacity11
    • 2.2.1 LBA mode11
  • 2.3 Default logical geometry11
  • 2.4 Recording and interface technology11
  • 2.5 Physical characteristics12
  • 2.6 Seek time12
  • 2.7 Start/stop times13
  • 2.8 Power specifications13
    • 2.8.1 Power consumption13
    • 2.8.2 Conducted noise14
    • 2.8.3 Voltage tolerance15
    • 2.8.4 Power-management modes15
  • 2.9 Environmental specifications16
    • 2.9.1 Ambient temperature16
    • 2.9.2 Temperature gradient16
    • 2.9.3 Humidity16
    • 2.9.4 Altitude16
    • 2.9.5 Shock17
    • 2.9.6 Non-operating vibration17
  • 2.10 Acoustics18
    • 2.10.1 Test for Prominent Discrete Tones (PDTs)18
  • 2.11 Electromagnetic immunity18
  • 2.12 Reliability19
    • 2.12.1 Annualized Failure Rate (AFR)19
    • 2.12.2 Storage19
  • 2.13 Agency certification19
    • 2.13.1 Safety certification19
    • 2.13.2 Electromagnetic compatibility19
    • 2.13.3 FCC verification20
  • 2.14 Environmental protection21
    • 2.14.1 European Union Restriction of Hazardous Substances (RoHS) Directive21
    • 2.14.2 China Requirements — China RoHS 221
  • 2.15 Corrosive environment22
• 3.0 Configuring and Mounting the Drive23
  • 3.1 Handling and static-discharge precautions23
  • 3.2 Configuring the drive23
  • 3.3 SATA cables and connectors23
  • 3.4 Drive mounting24
• 4.0 About (SED) Self-Encrypting Drives27
  • 4.1 Data Encryption27
  • 4.2 Controlled Access27
    • 4.2.1 Admin SP27
    • 4.2.2 Locking SP27
    • 4.2.3 Default password27
    • 4.2.4 ATA Enhanced Security27
  • 4.3 Random Number Generator (RNG)27
  • 4.4 Drive Locking28
  • 4.5 Data Bands (TBD)28
  • 4.6 Cryptographic Erase28
  • 4.7 Authenticated Firmware Download28
  • 4.8 Power Requirements28
  • 4.9 Supported Commands28
  • 4.10 RevertSP28
• 5.0 SATA Interface29
  • 5.1 Hot-Plug compatibility29
  • 5.2 SATA device plug connector pin definitions29
  • 5.3 Supported ATA commands30
    • 5.3.1 Identify Device command32
    • 5.3.2 Set Features command36
    • 5.3.3 S.M.A.R.T. commands37