Loading ...
Loading ...
Loading ...
Transporting Your Motorcycle
128 Tips
Transporting Your Motorcycle
If you use a truck or motorcycle trailer to transport
your Honda, we recommend that you follow these
guidelines:
•Use a loading ramp.
• Make sure the fuel valve is off.
• Secure the motorcycle in
an upright position,
using motorcycle tie-down straps. Avoid using
rope, which can loosen and allow the
motorcycle to fall over.
To secure your CRF, brace the front wheel against
the front of the truck bed or trailer rail.
Attach the lower ends of two straps to the tie-down
hooks on your CRF. Attach the upper ends of the
straps to the handlebar (one on the right side, the
other on the left), close to the fork.
Check that the tie-down straps do not contact any
control cables or electrical wiring.
Tighten both straps until the front suspension is
compressed about half-way. Too much pressure is
unnecessary and could damage the fork seals.
Use another tie-down strap to keep the rear of the
motorcycle from moving.
We recommend that you do not transport your
CRF on its side. This can damage the motorcycle,
and leaking gasoline could be a hazard.
Loading ...
Loading ...
Loading ...