Loading ...
Loading ...
Loading ...
Rear Suspension Adjustments
Adjustments for Competition 103
Compression Damping
Compression damping can be adjusted with the
adjuster located on the rear shock absorber's
reservoir.
The compression damping adjuster has 3 turns or
less.
To increase damping, turn the adjuster screw
clockwise.
To decrease damping, turn the screw
counterclockwise.
To adjust to the standard position:
1. Turn the compression damping adjuster
(1)
clockwise until it will no longer turn (lightly
seats). This is the full hard position.
2. Turn the adjuster counterclockwise 1 – 1 1/4
turns, and make sure that the punch mark (2)
on the adjuster aligns with the reference mark
(3) on the shock absorber.
Rebound Damping
The rebound damping adjuster (1) is located at the
lower end of the shock absorber.
The rebound damping adjuster has 3 turns or less.
To increase damping, turn the adjuster screw
clockwise.
To decrease damping, turn the adjuster screw
counterclockwise.
To adjust to the standard position:
1. Turn the adjuster clockwise until
it will no
longer turn (lightly seats). This is the full hard
position.
2. Turn the adjuster counterclockwise 3/8 – 5/8
turns, and make sure that the punch mark (2)
on the adjuster aligns with the reference mark
(3) on the shock absorber.
Rear Suspension Damping
(1) compression damping adjuster (3) reference mark
(2) punch mark
(1)
(3)
(2)
(1) rebound damping adjuster (3) reference mark
(2) punch mark
(1)
(2)
(3)
Loading ...
Loading ...
Loading ...