Loading ...
Loading ...
Loading ...
62
Input the directory on the server in Directory
if necessary.
6 Tap Transfer.
The camcorder starts uploading the selected
file.
To cancel uploading, tap Cancel.
Checking the file transfer
You can check the upload status on the Job List
screen that is displayed by tapping Job List on the
SD Card, Slot A, or Slot B screen (page 70).
Notes
• Up to 200 transfer jobs can be registered.
• The job list is retained when the camcorder is turned
off, but up to 10 minutes of recent progress
information may be lost if the battery pack is removed
or the camcorder is powered off without first setting
the ON/STANDBY switch to STANDBY.
• Jobs added after the battery low voltage state are not
saved in the job list.
• If an error occurs during file transfer, the transfer of a
clip with the same name as a transferred clip may not
be resumed depending on the settings and status of the
transfer destination server. In this case, check the
transfer destination server settings and status.
If File Transfer >Auto Upload (Proxy) in the
Network menu is set to On and a network
connection exists, proxy files are automatically
uploaded to the server specified using Auto
Upload Server when recording ends.
For details, see “Uploading a proxy file
automatically” (page 69).
You can upload files with encryption using FTPS
in Explicit mode (FTPES) for the connection with
the destination file server.
Setting secure FTP transfer
For secure FTP transfer, set Using Secure
Protocol on the destination file server to ON and
import a certificate.
For details about configuration, see “Registering
a destination server” (page 69).
You can transmit the video and audio recorded/
played back with the camcorder via the Internet or
local network.
Note
• The NETWORK upgrade license (option) is required
to use this function.
Setting the streaming destination and
format
Up to three streaming destinations can be
configured as Destination Settings.
1 Select Streaming >Destination
Settings1 (or Destination Settings2,
Destination Settings3) in the Network
menu.
The streaming connection destination setup
screen appears.
2 Set each item on the connection
destination setup screen.
Display Name
Set the display name in the Destination
Settings menu.
Streaming Type
Displays the type of video for streaming
(fixed to MPEG-2 TS/UDP).
Streaming Format
Set the format of the video to stream.
• 1920×1080 9M
• 1920×1080 6M
• 1920×1080 3M
• 1280×720P 9M
• 1280×720P 6M
• 1280×720P 3M
• 1280×720P 2M
• 640×360P 3M
• 640×360P 2M
• 640×360P 1M
• 480×270P 1M
• 480×270P 0.5M
• 480×270P 0.3M
• 480×270P 0.2M
• 320×180P 0.2M
Uploading proxy files
automatically
Uploading using Secure FTP
Transmitting Streaming
Video and Audio
Loading ...
Loading ...
Loading ...