Loading ...
Loading ...
Loading ...
17
1.15 OTHERS
1.15.1 The system will enter into power saving mode automatically if there is no any action within 10
minutes under IDLE MODE and there is no display and backlight on the computer. Press any key to
resume the system.
1.15.2 Countdown time, countdown calorie and countdown distance, you can only set one of them at a
time. It will only start the last set countdown when you press start. The set parameter will start to
countdown and others display normal data..
1.15.3 On display – Distance covered, Calories burnt, Pulse reading, Body Fat test, Steps Counted,
Altitude ran are only for indicative purpose and may vary from machine to machine. Do not compare
these readings to a medical instrument.
1.15.4 You can set parameters in a cycle. Ex: Set time range is 5:00-99:00, when at 5:00 you
can hit “-” key and it will go to 99:00, when at 99:00 you can hit “+” and it will go to 5:00.
1.15.5 When the treadmill is running, press Mode+Program buttons at the same time for at
least 3 seconds to go from Scan mode to stay display one. Press again to stay at display two.
Press again to go back to scan mode Note: You will hear a beep if you successfully switch
the display modes.
1.15.6 When you remove safety key, you can press Mode+Program buttons at the same time
for at least 3 seconds to view treadmill’s Odometer. During this mode if you press
mode+program for 3 seconds it will reset the odometer. If want to leave mode without
resetting the data, just plug in the safety key.
1.16 Bluetooth music function:
Connect to the treadmill’s speakers using your phone or tablet. The treadmill’s Bluetooth
name would be under “QY-BTSP.” The treadmill’s speaker is set at highest volume, use your
phone or tablet to adjust the volume.
Loading ...
Loading ...
Loading ...