Loading ...
Loading ...
Loading ...
21
USE AND CARE INFORMATION
Cleaningbafegreaselters
The lters must be cleaned every 2 months of operation,
or more frequently for particularly heavy usage, and can
be washed in a dishwasher.
The metal grease lters should be cleaned frequently
in hot detergent solution or washed in the dishwasher.
Stainless steel cleaner should be used on stainless
rangehoods. Abrasives and scouring agents can scratch
stainless steel nishes and should not be used to clean
nished surface.
Replacingactivatedcharcoallter
The lter is not washable and cannot be regenerated,
and must be replaced approximately every 4 months of
operation, or more frequently for particularly heavy usage.
• Remove the Filters one at a time, pushing them
towards the back of the unit and at the same time
pulling downward.
• Remove the saturated charcoal lter by releasing
the xing hooks.
• Fit the new lter and fasten it in its correct position.
• Replace, taking care to ensure that the handle faces
forwards.
L Light Button: Switches the lighting system on and off.
M Blower Button: Switches the extractor blower on and off.
V Speed Buttons: 1) Low speed, used for a continuous and silent air change in the presence
of light cooking vapor. 2) Medium speed, suitable for most operating conditions given the
optimum treated air ow/noise level ratio. 3) Maximum speed, used for eliminating the
highest cooking vapor emission, including long periods.
Lighting unit
• Remove the snap-on lamp cover
by levering it from under the metal
ring, supporting it with one hand.
• Replace the lamp with a new one
of the same type, making sure that
you insert the two pins properly into
the housings on the lamp holder.
• Replace the snap-on lamp cover.
Gu10 self-ballasted led
lamps – listed in ac-
cordance with
ul 1993/nmx-
j-578/1-ance/
csa c22.2 No.
1993
Loading ...
Loading ...
Loading ...