Loading ...
Loading ...
Loading ...
Oven Light Bulbs (if included)
NOTE: The glass cover should be
removed only when cold. Wearing latex
gloves may offer a better grip.
CAUTION: Before replacing
your oven light bulb, disconnect the
electrical power to the oven at the main
fuse or circuit breaker panel.
Be sure to let the light cover and bulb cool
completely.
For your safety, do not touch a hot bulb
with bare hands or a damp cloth.
To remove:
Turn the glass cover counterclockwise
1/4 turn until the tabs of the glass
cover clear the grooves of the socket.
Using gloves or a dry cloth, remove
the bulb by pulling it straight out.
To replace:
Use a new 130-volt halogen bulb, not
to exceed 50 watts.
Using gloves or a dry cloth, remove
the bulb from its packaging. Do not
touch the bulb with bare fingers.
Push the bulb straight into the
receptacle all the way.
Place the tabs of the glass cover into
the grooves of the socket. Turn the
glass cover clockwise 1/4 turn to
engage.
For improved lighting inside the oven,
clean the glass cover frequently using
a wet cloth. This should be done when
the oven is completely cool.
Reconnect electrical power to the
oven.
Bulb
Socket
Tab
Glass cover
Use
gloves or
cloth
Receptacle
Receptacle
GEAppliances.com
Burner Grates, Vent Grille and Vent Grille Cap
Porcelain enamel burner grates, vent grille
and vent grille cap should be washed
regularly and, of course, after spillovers.
Wash them in hot, soapy water and rinse
with clean water. You may also use
abrasive cleaners and scouring pads, if
needed. Dry them with a cloth—don’t put
them back on the cooktop wet.
Although they’re durable, the grates, vent
grille and vent grille cap will gradually lose
their shine, regardless of the best care you
can give them. This is due to their continual
exposure to high temperatures.
Do not operate a burner for an extended
period of time without cookware on the
grate. The finish on the grate may chip
without cookware to absorb the heat.
After cleaning, first replace the vent grille
and the vent grille cap.
Replace the side grates so that they fit over
the tabs on the vent grille. Make sure the
grates are positioned securely over the
burners and that they are stable and level.
Rubber Grate Feet
For stability, your cooktop has rubber feet
on the burner grates. If any of these rubber
feet should become damaged or lost,
replace them immediately.
To order replacement rubber grate feet,
please call our toll-free number:
National Parts
Center . . . . . . . . . . . . . . . 800.626.2002 (U.S.)
800.661.1616 (Canada)
Rubber Grate Feet . . . . . . .#WB02T10101
23
Air inlet
Vent grille
Vent grille
cap
Loading ...
Loading ...
Loading ...