Loading ...
Loading ...
Loading ...
10
C
ONTROL LOCK/UNLOCK
PRESS + AND – AND HOLD FOR 3 SECONDS
Oven Control, Clock and Timer Features and Settings
BAKE/TEMP RECALL Pad
Touch this pad to select the bake function.
BAKE Light
Flashes while in edit mode—you can change
the oven temperature at this point. Glows when
the oven is in bake mode.
START/ON Pad
Must be touched to start any cooking or
cleaning function.
Display
Shows the time of day, oven temperature,
whether the oven is in the bake, broil or self-
cleaning mode and the times set for the timer
or automatic oven operations. The display will
show “PrE” while preheating. When the oven
reaches the selected temperature, the oven
control will beep and the display will show the
oven temperature.
Function Error Code
If “F– and a number or letter” flash in the display and
the oven control signals, this indicates a function
error code.
If the function error code appears during the self-
cleaning cycle, check the oven door latch. The latch
handle may have been moved, even if only slightly,
from the latched position. Make sure the latch is
moved to the right as far as it will go.
Touch the CLEAR/OFF pad. Allow the oven to cool
for one hour. Put the oven back into operation. If the
function error code repeats, disconnect the power to
the range and call for service.
KITCHEN TIMER ON/OFF Pad
Touch this pad to select the timer feature.
Then press + and – pads to adjust time.
TIMER Light
Flashes while in edit mode—you can change
the set time at this point. Glows when the timer
has been activated. Flashes again when the
time has run out until the control is reset.
CLOCK Pad
To set clock, touch this pad twice and then
touch the + and – pads. The time of day will
flash in display when oven is first turned on.
START TIME Pad
Use along with the COOKING TIME or SELF
CLEAN pads to set the oven to start and stop
automatically at a time you set.
START TIME Time Light
Flashes while in edit mode—you can change
the start time set time at this point. Glows when
the function has been activated.
COOKING TIME Pad
Touch this pad and then touch the + or –
pads to set the amount of time you want your
food to cook. The oven will shut off when the
cooking time has run out.
COOKING TIME Light
Flashes while in edit mode—you can change set
time at this point. Glows when function has
been activated. Flashes again when the time
has run out until the control is reset.
AUTOMATIC OVEN Light
This lights anytime the oven has been
programmed using the COOKING TIME or
START TIME functions.
Throughout this manual, features and appearance may vary from your model.
Using the oven controls.
Loading ...
Loading ...
Loading ...