Loading ...
Loading ...
Loading ...
45
GB
Basic Operations
Using the Sleep Timer
You can set the receiver to turn off
automatically at a specified time.
Press AMP, then press SLEEP
repeatedly while the power is on.
“SLEEP” lights up in the display.
Each time you press SLEEP, the display
changes cyclically as follows:
0:30:00 t 1:00:00 t 1:30:00 t
2:00:00
t OFF
Tips
• To check the remaining time before the receiver
turns off, press SLEEP. The remaining time
appears on the display. If you press SLEEP again,
the Sleep Timer will be canceled.
• You can also set the Sleep Timer by using the
“SLEEP” in SYSTEM menu.
Recording
You can record from a video/audio component
using the receiver. Refer to the operating
instructions supplied with your recording
component.
You can record onto a CD-R using the
receiver. Refer to the operating instructions
supplied with your CD recorder.
1 Press one of the input buttons
to select the playback
component.
You can also use INPUT SELECTOR on
the receiver.
2 Prepare the playback
component for playing.
For example, tune to the radio station you
want to record (page 46).
3 Prepare the recording
component.
Insert a blank CD-R into the CD recorder
and adjust the recording level.
4 Start recording on the
recording component, then
start playback on the playback
component.
Note
Sound adjustments do not affect the signal output
from the SA-CD/CD/CD-R AUDIO OUT jacks.
.
mM
>
Xx
BD DVD
SAT/
CATV
VIDEO 1 VIDEO 2
HDMI 3HDMI 2HDMI 1
HDMI 4
SA-CD/
CD
TUNERDMPORT
<
<
MENU
O
TV
SLEEP
AMP
Recording onto a CD-R
Loading ...
Loading ...
Loading ...