Loading ...
Loading ...
Loading ...
Changing Engine Oil & Filter
Changing the oil and filter requires special
tools. We recommend that you have your
motorcycle serviced by your dealer.
Use a new Honda Genuine oil filter or
equivalent specified for your model.
NOTICE
Using the wrong oil filter can result in serious
damage to the engine.
1.
If the engine is cold, idle the engine for 3
to 5 minutes.
2.
Turn the ignition switch to the OFF
position and wait for 2 to 3 minutes.
3.
Place your motorcycle on a firm, level
surface.
4.
Place a drain pan under the drain bolt.
5.
Remove the oil fill cap, drain bolt, and
sealing washer to drain the oil.
6.
Remove the oil filter cover, oil filter, spring
and gasket by removing the oil filter cover
bolts and let the remaining oil drain out.
u Discard the oil and oil filter at an
approved recycling center.
7.
Install the new oil filter with the OUT-SIDE
mark facing out.
20161124110921_31K87A000_enu_BOOK Page 74 Thursday, November 24 2016 11:13:27 JST
Engine Oil u Changing Engine Oil & Filter
Maintenance
71
Continued
Drain boltSealing washer
Loading ...
Loading ...
Loading ...