Loading ...
Loading ...
Loading ...
Servicing Your Honda
75
Throttle
You can reduce throttle grip movement.
1.Remove the M5 × 10 screw (1) from the
throttle housing.
2.Replace the M5 × 10 screw with M5 × 40
screw (2) provided and tighten it fully.
When the M5 × 10 screw is installed, the
throttle can be fully opened.
When the M5 × 40 screw is installed, the
throttle opening is restricted to approximately
50% and the maximum engine speed is limited.
Do not remove the screw except when
activating or deactivating the limiter.
Use only provided screws. Do not use any other
screw.
Never operate the motorcycle without either the
M5 × 10 or M5 × 40 screws installed as debris
can enter the housing and cause the throttle to
bind.
Throttle Limiter Activation
(1)
RIGHT HANDLEBAR
(1)
(2)
(1) M5x10 screw
(2) M5x40 screw
Loading ...
Loading ...
Loading ...