Loading ...
Loading ...
Loading ...
Servicing Your Honda
97
Wheels
3.Rotate the wheel slowly to see if it appears to
‘‘wobble.’’ If it does, the rim is out of round
or not ‘‘true.’’ If the wobble is noticeable, see
your dealer for inspection.
Removal
1.Raise the front wheel off the ground by
placing a maintenance stand or support block
under the engine. Secure the rear of the
motorcycle with tie-down straps.
2.Loosen the cable guide bolt (1) on the fork
leg.
3.Disconnect the front brake cable (2) from the
brake arm (3).
4.Remove the front axle nut (4) and front axle
shaft.
5.Remove the wheel.
6.Pull the brake assembly out carefully.
Take care to prevent getting grease, oil, or dirt
on the brake shoe surfaces. This can cause poor
brake performance or rapid brake shoe wear
after reassembly.
(cont’d)
Front Wheel Removal
(1)
(2)
LEFT FRONT
LEFT FRONT
(2)
(5)
(4)
(3)
(1) cable guide bolt
(2) front brake cable
(3) brake arm
(4) front axle nut
(5) lug
(6) slot
(6)
Loading ...
Loading ...
Loading ...