Loading ...
Loading ...
Loading ...
68
Servicing Your Honda
Engine Oil
8. Remove the old sealing washer (2) and
install a new sealing washer on the drain
bolt.
9. Install the oil drain bolt and tighten to the
specified torque:
18 lbf·ft (24 N·m , 2.4 kgf·m)
10.
Pour the recommended oil into the
crankcase, approximately:
1.1 US qt (1.0 )
11.
Install the oil fill cap/dipstick securely.
12.
Start the engine. Let it idle 3-5 minutes, then
turn it off.
13.
With the motorcycle held upright on level
ground, check the oil level.
If needed, add oil (page 66) until it reaches
the upper level mark. (Do not overfill.)
14.
Check for oil leaks.
Loading ...
Loading ...
Loading ...