Loading ...
Loading ...
Loading ...
3
Installing the Stand or Wall Mount Bracket
Top notch of the cover
If you want to install the stand, you need to follow the illustrations and textual
instructions below to complete the installation steps:
1. Remove the cover of the subwoofer. Insert a flat screwdriver or a similar tool into the
notch on the top of the cover, and remove it. (see Figure 1)
Installing the Stand
CAUTION
Be sure to disconnect the A/C power cord before installing a stand or wall mount
brackets.
The display on your TV is fragile. Make sure the TV screen is not scratched or
damaged by hard objects or from pressure.
After the installation is complete, make sure the TV is steady on a table or firmly
attached to a wall mount, before removing all protective film, if any.
2. Secure the subwoofer connector to the subwoofer with 4 screws, and connect the
power cord to power socket of the subwoofer. (see Figure 2)
Power Cord
Power
Socket
Screws:
M4×20
Figure 1
Figure 2
Loading ...
Loading ...
Loading ...