LC-32D64U Sharp User Manual

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07430-2135

SHARP CORPORATION

Printed in Mexico

Imprimé au Mexique

Impreso en México

TINS-D490WJZZ

08P01-MX-NM

LC-32D64U

LC-37D64U

ENGLISHFRANÇAISESPAÑOL

IMPORTANT : Please read this operation manual before starting operating the equipment.

IMPORTANTE : Lea este manual de operación antes de comenzar a operar el equipo.

OPERATION MANUAL

MODE D'EMPLOI

MANUAL DE OPERACIÓN

LIQUID CRYSTAL TELEVISION

TÉLÉVISEUR ACL

TELEVISOR CON PANTALLA

DE CRISTAL LÍQUIDO

LC-3237D64UEHyo.indd1LC-3237D64UEHyo.indd1 2008/02/0112:01:212008/02/0112:01:21

Unit: inch (mm)

Dimensional Drawings

LC-37D64U

LC-32D64U

(300)

(100)

(95)

(65)

(776)

(701.5)

(57)

(130)

(517)

(898)

(824.4)

(638)

(57)

(581)

(369)

(463.8)

(574)

(334)

(395.9)

(480)

(276)

(300)

(100)

(95)

(65)

(300)

(156.7)

LC-3237D64UEHyo.indd2LC-3237D64UEHyo.indd2 2007/12/139:20:052007/12/139:20:05

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING:

The lightning ﬂash with arrow-head

symbol, within an equilateral triangle,

is intended to alert the user to the

presence of uninsulated “dangerous

voltage” within the product's

enclosure that may be of sufﬁcient

magnitude to constitute a risk of

electric shock to persons.

The exclamation point within a

triangle is intended to alert the user

to the presence of important

operating and maintenance

(servicing) instructions in the

literature accompanying the product.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE

SLOT, FULLY INSERT.

CAUTION:

LC-32D64U

LC-37D64U

OPERATION MANUAL

• The illustrations and on-screen displays in this operation manual are for

explanation purposes and may vary slightly from the actual operations.

• Menu items that are not selectable are grayed out.

• The examples used throughout this manual are based on the LC-32D64U

model.

• To avoid scratching the frame or screen, please use a soft, lint free cloth

for cleaning. Approved cleaning cloths are available directly from Sharp in

single (00Z-LCD-CLOTH) or triple (00Z-LCD-CLOTH-3) packs. Call 1-800

BE SHARP for ordering, or VISIT www.sharpusa.com/SharpDirect.

IMPORTANT:

To aid reporting in case of loss or theft, please record the

TV's model and serial numbers in the space provided. The

numbers are located at the rear of the TV.

Model No.:

Serial No.:

LIQUID CRYSTAL TELEVISION

ENGLISH

IMPORTANT INFORMATION

ENGLISH

LC-3237D64UE.indb1LC-3237D64UE.indb1 2007/12/139:18:462007/12/139:18:46

WARNING: FCC Regulations state that any unauthorized changes or modiﬁcations to this equipment not expressly

approved by the manufacturer could void the user's authority to operate this equipment.

“Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the National

Electrical Code that provides guidelines for proper grounding and, in particular, speciﬁes that the cable ground shall be connected to the

grounding system of the building, as close to the point of cable entry as practical.”

This product utilizes tin-lead solder, and ﬂuorescent lamp containing a small amount of

mercury. Disposal of these materials may be regulated due to environmental

considerations. For disposal or recycling information, please contact your local

authorities, the Electronic Industries Alliance: www.eiae.org, the lamp recycling

organization: www.lamprecycle.org or Sharp at 1-800-BE-SHARP

(For U.S.A. only)

CAUTION:

This product satisﬁes FCC regulations when shielded cables and connectors are used to connect the unit to other

equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded

cables and connectors for connections.

INFORMATION:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

DECLARATION OF CONFORMITY:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

RESPONSIBLE PARTY:

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07430-2135

TEL: 1-800-BE-SHARP

For Business Customers: URL http://www.sharpusa.com

CAUTION:

DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE.

THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO

THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED

BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER'S

INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES

RECOMMENDED BY THE MANUFACTURER. A PRODUCT AND CART COMBINATION SHOULD BE

MOVED WITH CARE. QUICK STOPS, EXCESSIVE FORCE, AND UNEVEN SURFACES MAY CAUSE

THE PRODUCT AND CART COMBINATION TO OVERTURN.

• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby

Laboratories.

• “HDMI, the HDMI logo and High-Deﬁ nition Multimedia Interface are trademarks or registered trademarks of HDMI

Licensing LLC.”

IMPORTANT INFORMATION

SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-32D64U/LC-37D64U

Trademarks

• Products that have earned the ENERGY STAR

are designed to protect the environment through superior energy

efﬁ ciency.

LC-3237D64UE.indb2LC-3237D64UE.indb2 2007/12/139:18:472007/12/139:18:47

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage

if improperly handled. This product has been engineered and manufactured with the highest priority on safety.

However, improper use can result in electric shock and/or ﬁre. In order to prevent potential danger, please

observe the following instructions when installing, operating and cleaning the product. To ensure your safety

and prolong the service life of your Liquid Crystal Television, please read the following precautions carefully

before using the product.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

ampliﬁers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug has two blades and a third grounding prong. The

wide blade or the third prong are provided for your safety. If the provided plug does not ﬁt into your outlet,

consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11) Only use attachments/accessories speciﬁed by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold

with the apparatus. When a cart is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate

normally, or has been dropped.

Additional Safety Information

15) Power Sources—This product should be operated only from the type of power source indicated on the

marking label. If you are not sure of the type of power supply to your home, consult your product dealer or

local power company. For products intended to operate from battery power, or other sources, refer to the

operating instructions.

16) Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as this

can result in a risk of ﬁre or electric shock.

17) Object and Liquid Entry—Never push objects of any kind into this product through openings as they may

touch dangerous voltage points or short-out parts that could result in a ﬁre or electric shock. Never spill

liquid of any kind on the product.

18) Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualiﬁed

service personnel under the following conditions:

a) When the AC cord or plug is damaged,

b) If liquid has been spilled, or objects have fallen into the product,

c) If the product has been exposed to rain or water,

d) If the product does not operate normally by following the operating instructions.

Adjust only those controls that are covered by the operating instructions as an improper adjustment

of other controls may result in damage and will often require extensive work by a qualiﬁed technician

to restore the product to its normal operation,

e) If the product has been dropped or damaged in any way, and

f) When the product exhibits a distinct change in performance - this indicates a need for service.

19) Replacement Parts—When replacement parts are required, be sure the service technician has used

replacement parts speciﬁed by the manufacturer or have the same characteristics as the original part.

Unauthorized substitutions may result in ﬁre, electric shock, or other hazards.

20) Safety Check—Upon completion of any service or repairs to this product, ask the service technician to

perform safety checks to determine that the product is in proper operating condition.

21) Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product

according to the method recommended by the manufacturer.

DEAR SHARP CUSTOMER

Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years

of trouble-free operation of your product, please read the Important Safety Instructions carefully before

using this product.

IMPORTANT SAFETY INSTRUCTIONS

LC-3237D64UE.indb3LC-3237D64UE.indb3 2007/12/139:18:472007/12/139:18:47

IMPORTANT SAFETY INSTRUCTIONS

• Outdoor Antenna Grounding — If an outside antenna is

connected to the television equipment, be sure the antenna

system is grounded so as to provide some protection against

voltage surges and built-up static charges.

Article 810 of the National Electrical Code, ANSI/NFPA 70,

provides information with regard to proper grounding of the

mast and supporting structure, grounding of the lead-in wire

to an antenna discharge unit, size of grounding conductors,

location of antenna-discharge unit, connection to grounding

electrodes, and requirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE, ANSI/NFPA 70

ANTENNA

LEAD IN WIRE

GROUND

CLAMP

NEC — NATIONAL ELECTRICAL CODE

GROUNDING

CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

ELECTRIC

SERVICE

EQUIPMENT

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

• Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or

laundry tub; in a wet basement; or near a swimming pool; and the like.

• Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base

can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart,

stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product

on a wall, be sure to follow the manufacturer's instructions. Use only the mounting hardware recommended by the

manufacturer.

• Selecting the location — Select a place with no direct sunlight and good ventilation.

• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents

and openings since insufﬁ cient ventilation can cause overheating and/or shorten the life of the product. Do not place

the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not

designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper

ventilation is provided or the manufacturer's instructions are followed.

• The Liquid Crystal panel used in this product is made of glass. Therefore, it can break when the product is dropped or

applied with impact. Be careful not to be injured by broken glass pieces in case the panel breaks.

• Heat — The product should be situated away from heat sources such as radiators, heat registers, stoves, or other

products (including ampliﬁ ers) that produce heat.

• The Liquid Crystal panel is a very high technology product with 2,073,600 thin ﬁ lm transistors, giving you ﬁ ne picture

details.

Occasionally, a few non-active pixels may appear on the screen as a ﬁ xed point of blue, green or red. Please note that

this does not affect the performance of your product.

• Lightning — For added protection for this television equipment during a lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to

the equipment due to lightning and power-line surges.

• Power Lines — An outside antenna system should not be located in the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

• To prevent ﬁ re, never place any type of candle or ﬂ ames on the top or near the TV set.

• To prevent ﬁ re or shock hazard, do not place the AC cord under the TV

set or other heavy items.

• Do not display a still picture for a long time, as this could cause an afterimage to remain.

• To prevent ﬁ re or shock hazard, do not expose this product to dripping

or splashing.

No objects ﬁ lled with liquids, such as vases, should be placed on the product.

Precautions when transporting the TV

• Be sure to always carry the TV by two people holding it with two hands — one hand on each side of the TV.

• Turn off the main power and unplug the AC cord from the wall outlet before handling.

• Use a soft cloth and gently wipe the surface of the display panel. Using a hard cloth may

scratch the panel surface.

• Use a soft damp cloth to gently wipe the panel when it is really dirty.

(It may scratch the panel surface when wiped strongly.)

• If the panel is dusty, use an anti-static brush, which is commercially available, to clean it.

• To protect the panel, do not use a dirty cloth, liquid cleaners or chemical cloth to clean it, such materials may damage

the panel surface.

• To clean the outer cabinet, use the same method. Do not use liquid or aerosol cleaners.

LC-3237D64UE.indb4LC-3237D64UE.indb4 2007/12/139:18:472007/12/139:18:47

Hex key

Screws

Soft cushion

Attaching/Detaching the Stand

• Before attaching (or detaching) the stand, unplug the AC

cord from the AC INPUT terminal.

• Before performing work spread cushioning over the base

area to lay the TV on. This will prevent it from being

damaged.

CAUTION

• Attach the stand in the correct direction.

• Do not remove the stand from the TV unless using an

optional wall mount bracket to mount it.

• Be sure to follow the instructions. Incorrect installation

of the stand may result in the TV falling over.

1 Conﬁ rm that there are 9 screws supplied with the

stand unit.

2 Attach the supporting post for the stand unit onto

the base using the box for the stand unit as shown

below.

• To detach the stand, perform the steps in reverse order.

Vertical mounting

Angular mounting

Setting the TV on the Wall

CAUTION

• This TV should be mounted on the wall with both

the AN-37AG2 (SHARP) wall mount bracket and the

AN-37P30 (SHARP) attachment of the wall mount

bracket. The TV cannot be mounted when with

only the AN-37AG2 wall mount bracket. The use of

other wall mount brackets may result in an unstable

installation and may cause serious injuries.

• Installing the TV requires special skill that should

only be performed by qualiﬁ ed service personnel.

Customers should not attempt to do the work

themselves. SHARP bears no responsibility for

improper mounting or mounting that results in

accident or injury.

Using an optional bracket to mount the TV

•

You can ask a qualiﬁ ed service professional about

using an optional AN-37AG2 bracket to mount the TV

to the wall.

• Carefully read the instructions that come with the

bracket before beginning work.

Hanging on the wall

AN-37AG2 wall mount bracket.

(See the bracket instructions for details.)

• Detach the cable clamp on the rear of the TV when using

the optional mount bracket.

• Due to the terminal conﬁ guration on this TV, when you

wall-mount this model, make sure there is enough space

between the wall and the TV for the cables.

• To use this TV mounted on a wall, ﬁ rst remove the

adhesive tape at the 4 locations on the rear of the TV, and

then use the screws supplied with the wall mount bracket

to secure the bracket to the rear of the TV.

About setting the TV angle

QUICK REFERENCE

Hex key

Screws

LC-32D64U

•

The center of the display:

inch (17.3 mm) under

the “A” position.

LC-37D64U

•

The center of the display:

inch (44.1 mm) under

the “A” position.

• Refer to the operation

manual of AN-37P30 for

details.

Insert the stand into the openings on the bottom

of the TV.

Insert and tighten the 4 screws into the 4 holes

on the rear of the TV.

LC-3237D64UE.indb5LC-3237D64UE.indb5 2007/12/139:18:472007/12/139:18:47

Using the Remote Control Unit

Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the

remote control unit and the remote control sensor may prevent proper operation.

30º 30º

30º

17´ (5 m)

Remote Control sensor

■

Cautions regarding the remote control unit

• Do not expose the remote control unit to shock. In addition,

do not expose the remote control unit to liquids, and do not

place in an area with high humidity.

• Do not install or place the remote control unit under direct

sunlight. The heat may cause deformation of the remote

control unit.

• The remote control unit may not work properly if the remote

control sensor on the TV is under direct sunlight or strong

lighting. In such cases, change the angle of the lighting

or the TV, or operate the remote control unit closer to the

remote control sensor.

IMPORTANT:

The POWER indicator on the AQUOS television should light GREEN indicating you have power to the AQUOS television.

If the POWER indicator on the AQUOS television still does not light up, press TV POWER on the remote control to turn the

power on.

IMPORTANT:

IF THE UNIT DOES NOT POWER ON - UNPLUG THE AQUOS TELEVISION FROM THE OUTLET AND REPEAT THE

INSTALLATION STEPS.

IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.

QUICK REFERENCE

Attach your antenna to the back of the AQUOS

television. (See page 7.)

Place the Ferrite core in the space indicated in the

below ﬁ gure and bundle the cords properly with

the cable clamp and the cable tie.

How to turn on the AQUOS television for the ﬁ rst time.

A) Press POWER on the AQUOS television.

Connect the AC plug for the AQUOS television into

the AC outlet.

B) The POWER indicator on the front of the

AQUOS television lights GREEN.

• Speakers cannot be detached from the TV.

• TV angle cannot be adjusted.

• Place the TV close to the AC outlet, and keep the power

plug within reach.

• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT

TOUCH UN-INSULATED PARTS OF ANY CABLES

WITH THE AC CORD CONNECTED.

QUICK INSTALLATION TIPS

AC outlet

Ferrite core

POWER

indicator

LC-3237D64UE01.indd6LC-3237D64UE01.indd6 2007/12/2810:48:062007/12/2810:48:06

Antennas

To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections

that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector,

plug it into the antenna terminal at the rear of the TV set.

1. A 75-ohm system is generally a round cable with F-type connector

that can easily be attached to a terminal without tools (Commercially

available).

F-type connector

300-ohm twin-lead cable (ﬂ at)

F-type connector

75-ohm coaxial cable (round)

75-ohm coaxial cable

NOTICE

2. A 300-ohm system is a ﬂ at “twin-lead” cable that can be attached

to a 75-ohm terminal through a 300/75-ohm adapter (Commercially

available).

When connecting the RF cable to the TV set, do not tighten F-type

connector with tools.

If tools are used, it may cause damage to your TV set. (The breaking

of internal circuit, etc.)

300-ohm twin-lead cable

75-ohm coaxial cable (round)

75-ohm coaxial cable

IN OUT

300-ohm

twin-lead cable

VHF

NTENNA

UHF

ANTENNA

Combiner

(commercially available)

300/75-ohm adapter

(commercially available)

300-ohm twin-lead cable (ﬂat)

75-ohm coaxial cable (round)

Cable TV lead-In

Coaxial cable

(commercially available)

Coaxial cable

(commercially available)

Home Antenna

terminal (75-ohm)

Home Antenna

terminal (75-ohm)

F-type connector should be ﬁ nger-tightened only.

CAUTION

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.

• Do not mix batteries of different types. Different types of batteries have different characteristics.

• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage

in old batteries.

• Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can cause a

rash. If you ﬁ nd any chemical leakage, wipe thoroughly with a cloth.

• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.

• If you will not be using the remote control unit for an extended period of time, remove batteries from it.

1 Open the battery cover.

• Place the batteries with their terminals

corresponding to the (

) and (

)

indications in the battery compartment.

2 Insert two “AAA” size batteries

(supplied with the product).

3 Close the battery cover.

Installing Batteries in the Remote Control Unit

If the remote control fails to operate TV functions, replace the batteries in the remote control unit.

Preparation

Connecting Antenna

Cable

Cable without a CATV

converter

Combination VHF/

UHF antenna

Separate VHF/UHF

antenna

To TV antenna

terminal

VHF/UHF antenna

• Connect the antenna cable to the TV using one of the methods in the illustration as shown (

LC-3237D64UE01.indd7LC-3237D64UE01.indd7 2007/12/1911:36:142007/12/1911:36:14

IMPORTANT INFORMATION ..................................1

Trademarks ..............................................................2

DEAR SHARP CUSTOMER .....................................3

IMPORTANT SAFETY INSTRUCTIONS ..................3

QUICK REFERENCE ................................................5

Attaching/Detaching the Stand ............................5

Setting the TV on the Wall ....................................5

QUICK INSTALLATION TIPS ................................6

Using the Remote Control Unit ............................6

Preparation ..............................................................7

Antennas .............................................................7

Installing Batteries in the Remote Control Unit ......7

Contents ...................................................................8

Supplied Accessories..............................................8

Part Names ..............................................................9

TV (Front) .............................................................9

TV (Top/Side/Rear) ..............................................9

Remote Control Unit ..........................................10

Connecting to External Equipment ......................11

Watching TV ...........................................................12

Turning On/Off the Power ..................................12

Initial Setup ........................................................12

Direct Button Operation ........................................13

On-Screen Display Menu ......................................17

Menu Items .......................................................17

On-Screen Display Menu Operation ...................18

Menu Operation Buttons ....................................18

Picture Menu .....................................................19

OPC Setting ..................................................19

Advanced Picture Setting ..............................19

Audio Menu .......................................................20

Surround .......................................................20

Bass Enhancer ..............................................20

Power Control Menu ..........................................21

No Signal Off .................................................21

No Operation Off ...........................................21

Setup Menu .......................................................21

EZ Setup .......................................................21

CH Setup ......................................................22

Antenna Setup-DIGITAL ................................22

Input Skip ......................................................22

Input Label ....................................................22

Input Signal (for Analog PC Input Mode Only)

...22

Auto Sync.

(for Analog PC Input Mode Only) .................22

Contents

Fine Sync. ....................................................22

Position .........................................................23

Language ......................................................23

Reset ............................................................23

Parental CTRL (Parental Control Setting) .......23

Option Menu ......................................................26

Audio Only ....................................................26

Digital Noise Reduction .................................26

Input Select ...................................................26

HDMI Setup ..................................................26

Output Select ................................................26

Color System ................................................26

Caption Setup ...............................................27

Digital Caption Info.

(Digital Caption Information) ........................27

Program Title Display ....................................27

Favorite CH (Favorite Channel Setting) ..........27

Game Play Time ............................................27

Operation Lock Out .......................................27

Digital Setup Menu ............................................28

Audio Setup ..................................................28

Identiﬁ cation ..................................................28

Software Update ...........................................28

Other Viewing Options ..........................................30

Presetting Remote Control Function ..................30

Operating the Connected Equipment .................30

Using AQUOS LINK ...............................................32

Controlling HDMI Equipment Using AQUOS LINK

...32

AQUOS LINK Menu ...........................................34

Appendix ................................................................35

Troubleshooting .................................................35

Troubleshooting-Digital Broadcasting ................35

RS-232C Port Speciﬁ cations .............................36

Speciﬁ cations ....................................................37

Optional Accessory ............................................37

PC Compatibility Chart ......................................38

Information on the Software License for This

Product ...........................................................38

Calling for Service .................................................39

LIMITED WARRANTY ............................................39

Dimensional Drawings

• The dimensional drawings for the LCD TV set are shown

on the inside back cover.

Supplied Accessories

• Always use the AC cord supplied with the TV.

Make sure the following accessories are provided with the product.

Remote control unit

(

Page 6

“AAA” size battery

(

Page 7

AC cord

(

Page 6

Stand unit

(

Page 5

Cable clamp (

Cable tie (

Page 6

Operation manual

(

LC-3237D64UE.indb8LC-3237D64UE.indb8 2007/12/139:18:492007/12/139:18:49

Part Names

TV (Front)

OPC indicator

(See page 19.)

POWER indicator

(See page 12.)

OPC sensor

(See page 19.)

Remote control sensor

SLEEP indicator

(See page 13.)

TV (Top/Side/Rear)

RS-232C terminal

DIGITAL AUDIO OUTPUT

terminal

INPUT 4 terminal (HDMI)

INPUT 5 terminals (HDMI)

INPUT 6 terminals (PC-IN)

Antenna/Cable in

INPUT 1 terminals

AC INPUT terminal

INPUT 2 terminals

AUDIO OUTPUT terminals

SERVICE

terminal

INPUT 3

terminals

POWER button

INPUT button

MENU button

Channel buttons

(CHV/U)

Volume buttons

(VOL

)

LC-3237D64UE01.indd9LC-3237D64UE01.indd9 2007/12/1911:36:232007/12/1911:36:23

116

Part Names

1 TV POWER: Switch the TV power on or enters standby. (See

page 12.)

2 DISPLAY: Display the channel information.

3 SOURCE POWER: Turns the power of the external equipment

on and off.

4 External equipment operational buttons: Operate the external

equipment.

5 0–9: Set the channel. (See page 13.)

6 • (DOT): (See pages 13 and 30.)

7 INPUT: Select a TV input source. (TV, INPUT 1, INPUT 2, INPUT 3,

INPUT 4, INPUT 5, INPUT 6) (See page 13.)

8 VOL

: Set the volume. (See page 13.)

9 SURROUND: Select Surround settings. (See page 13.)

10 FREEZE: Set the still image. Press again to return to normal

screen. (See page 13.)

11 EXIT: Turn off the menu screen.

12 OPTION: Display the AQUOS LINK MENU screen. This button

will function only when AQUOS LINK is used. (See pages 32 to 34

for details.)

13 REC STOP: Stops one touch recording. This button will function

only when AQUOS LINK is used. (See pages 32 to 34 for details.)

14 SLEEP: Set the sleep timer. (See page 13.)

15 AUDIO: Selects the MTS/SAP or the audio mode during multi-

channel audio broadcasts. (See page 14.)

16 FUNCTION: Switches the remote control for TV, CBL/SAT, VCR,

DVD and AUDIO operation. Indicator lights up for the current

mode. (See pages 30 to 31 for details.)

* To enter the code registration mode, you need to press

FUNCTION and DISPLAY at the same time.

17 LIGHT

: When this button is pressed, some buttons (for

example, VOL

and CH

) on the remote control unit will

light. The lighting will turn off if no operations are performed within

about 5 seconds. This button is used for performing operations in

low-light situations.

18 VIEW MODE: Select the screen size. (See page 16.)

19 ENT: Jumps to a channel after selecting with the 0–9 buttons.

20 FLASHBACK: Return to the previous channel or external input

mode. (See page 13.)

21 CH

: Select the channel. (See page 13.)

22 MUTE: Mute the sound. (See page 13.)

23 MENU: Display the menu screen.

,ENTER: Select a desired item on the screen.

25 RETURN: Return to the previous menu screen.

26 FAVORITE CH

A, B, C, D: Select 4 preset favorite channels in 4 different

categories. (See page 27.)

While watching, you can toggle the selected channels by pressing

A, B, C and D.

27 FAVORITE: Set the favorite channels. (See page 27.)

28 CC: Display captions from a closed-caption source. (See page

15.)

29 AV MODE: Select an audio or video setting.

(When the input source is TV, INPUT 1, 2 or 3: STANDARD,

MOVIE, GAME, USER, DYNAMIC (Fixed), DYNAMIC. When the

input source is INPUT 4, 5 or 6: STANDARD, MOVIE, GAME, PC,

xvYCC (INPUT 4/5 only), USER, DYNAMIC (Fixed), DYNAMIC) (See

page 14.)

Remote Control Unit

• When using the remote control unit, point it at the TV.

LC-3237D64UE.indb10LC-3237D64UE.indb10 2007/12/139:18:502007/12/139:18:50

Connecting to External Equipment

You can connect many types of external equipment to your TV like a Blu-ray disc player, HD-DVD player, DVD

player, VCR, Digital TV tuner, HDMI equipment, game console or camcorder. To view external source images,

select the input source from INPUT on the remote control unit or on the TV. (See page 13.)

CAUTION

• To protect equipment, always turn off the TV before connecting any external equipment.

• Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.

*1 • To enjoy the AQUOS 1080p display capability, connect your external equipment using a component cable and set the

equipment to 1080p output.

*2 • The S-VIDEO terminal takes priority over the video terminals. (INPUT 2 only)

*3 • When using an HDMI-DVI conversion cable, input the audio signal to AUDIO terminal of INPUT 5.

• To enjoy the AQUOS 1080p display capability, connect your Blu-ray disc player, HD-DVD player or other external

equipment using an HDMI-certiﬁ ed cable and set the equipment to 1080p output.

*4 • Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal in HDMI

connection. In this case, set the audio formats of the connected equipment to PCM, 32/44.1/48 kHz and 16 bits.

• The HDMI terminals only support digital signal.

• Refer to page 38 for a list of PC signals compatible with the TV.

Terminal on the TV

Cable

Terminal on external

equipment

INPUT 1, 2 or 3

INPUT 1 or 3

INPUT 4 or 5

DIGITAL AUDIO

OUTPUT

INPUT 2

Connecting a Blu-ray disc player, HD-DVD player, DVD player, Digital TV STB (Air or Cable), VCR,

game console or camcorder

AV cable (commercially available)

Component video cable (commercially available)

S-VIDEO cable (commercially available)

HDMI-certiﬁed cable (commercially available)

Optical ﬁber cable (commercially available)

Audio cable (commercially available)

Terminal on the TV

Cable

Terminal on PC

INPUT 6

Connecting a PC

RGB cable (commercially available)

Ø 3.5 mm stereo minijack cable (commercially available)

INPUT 4 or 5

HDMI-certiﬁed cable (commercially available)

LC-3237D64UE01.indd11LC-3237D64UE01.indd11 2008/01/0818:05:212008/01/0818:05:21

Language

TV Location

Air/Cable

CH Search

English

Español

Français

TV Location

Language

Air/Cable

CH Search

Home

Store

TV Location

Air/Cable

Language

CH Search

Analog & Digital Search Start

Cancel

Analog Search Start

POWER

Turning On/Off the Power

Air/Cable

TV Location

Language

CH Search

Start

Cancel

When "Air" is selected in Antenna setting:

Press

to select "Start", and then press ENTER.

When "Cable" is selected in Antenna setting:

Press

to select "Analog & Digital Search Start" to

search both analog and digital broadcasts, or to select

“Analog Search Start” to search only analog broadcasts,

and then press ENTER.

• The Channel search will start automatically.

• To exit the Channel search screen, select "Cancel", and

then press ENTER.

TV POWER

(On/Standby)

Press POWER on the TV, or TV POWER on the remote control unit to

turn the power on.

• POWER indicator (Green): The TV is on. (After a few seconds, a window

appears with sound.)

• The initial setup starts when the TV powers on for the ﬁ rst time. If the TV has

been turned on before, the EZ Setup will not be invoked. See page 21 for

performing EZ Setup from the Setup menu.

Press POWER on the TV, or TV POWER on the remote control unit

again to turn the power off.

• The TV enters standby and the image on the screen disappears.

• The POWER indicator on the TV turns off.

• If you are not going to use this TV for a long period of time, be sure to remove

the AC cord from the AC outlet.

• Weak electric power is still consumed even when the TV is turned off.

Watching TV

Initial Setup

When you turn on the TV for the ﬁ rst time, it will

automatically memorize the broadcasting channels

available in the region where you live. Perform the

following steps before you press TV POWER on the

remote control unit.

1. Insert the batteries into the remote control unit. (See page 7.)

2. Connect the antenna cable to the TV. (See page 7.)

3. Plug in the AC cord to the AC outlet. (See page 6.)

Language (Language setting)

Select from among 3 languages: English, French and Spanish.

Press

to select the desired language listed on the

screen, and then press ENTER.

CH Search (Channel search)

Channel auto search makes the TV look for all channels

viewable in the set area.

TV Location

Select "Home" or "Store" for the location where you plan to

install the TV.

Example

• If no channel is found, conﬁ rm the type of connection made

with your TV and try EZ Setup again.

(See page 21.)

Press

to select "Home" or "Store".

Press ENTER to enter the setting.

Air/Cable

TV Location

Language

CH Search

Air

Cable

Air/Cable (Antenna setting)

Make sure what kind of connection is made with your TV

when selecting "Air" or "Cable".

Example

Press

to select "Air" or "Cable".

Press ENTER to enter the setting.

• If you select "Home", AV MODE is set to "STANDARD".

• If you select "Store", AV MODE is set to "DYNAMIC (Fixed)".

In case no remote control signal is received within 30 minutes,

AV MODE will change to "DYNAMIC (Fixed)" automatically.

• For changing the TV Location after the setting, see "EZ

Setup" on page 21.

LC-3237D64UE.indb12LC-3237D64UE.indb12 2007/12/139:18:512007/12/139:18:51

Direct Button Operation

Sleep Timer

Allows you to set a time when the TV automatically

switches to standby.

Press SLEEP.

The remaining time displays when the sleep timer has been set.

Each time you press SLEEP, the remaining time switches

as shown below.

Off 30 60 90 120

When set, the time automatically starts counting down.

If you want to adjust the sleep timer, you can press SLEEP

twice then change the time setting.

Five minutes before the time expires, the remaining time

displays every minute.

Select "Off" by pressing SLEEP to cancel the sleep timer.

The TV will enter standby when the remaining time reaches zero.

When the sleep timer is set, its indicator on the TV lights red.

FLASHBACK

Press FLASHBACK to switch to the previously tuned

channel.

Press FLASHBACK again to switch back to the currently

tuned channel.

FLASHBACK will not work if no channel has been changed

after the TV is turned on.

SURROUND

The surround function produces Surround effect from

the speakers. Each time you press SURROUND, the

mode changes between On and Off.

On: Makes it possible to enjoy natural, realistic surround

sound.

Off: Outputs the normal sound.

You can have the same settings by choosing "Surround" on

the menu items. (See page 20.)

FREEZE

Allows you to capture and freeze a moving image that

you are watching.

Press FREEZE.

A moving image is captured.

Press FREEZE again to cancel the function.

When this function is not available, "No displaying still

image available." will display.

The still image automatically goes out after 30 minutes.

If you are using the freeze function and a broadcast

activates the V-CHIP BLOCK, the freeze function will be

canceled and a V-CHIP BLOCK message will appear.

INPUT

To view external source images, select the input

source

using INPUT on the remote control unit or on the TV.

Press INPUT.

A list of selectable sources appears.

Press INPUT again or press

to select the

input source.

An image from the selected source automatically displays.

Each time INPUT is pressed, the input source toggles.

If the corresponding input is not plugged in, you cannot change

the input. Be sure to connect the equipment beforehand.

See page 11 for external equipment connection.

•

Changing Channels

You can change channels by pressing CH

or 0-9,

• (DOT).

Examples:

To select a 1 or 2-digit channel number (e. g., Channel 5):

Press 5 ENT.

To select a 3-digit channel number (e. g., Channel 115):

Press 1 1 5 ENT.

To select a 4-digit channel number (e. g., Channel 22.1):

Press 2 2 • (DOT) 1 ENT.

When selecting a 1-digit channel number, it is not

necessary to press 0 before the number.

When you enter 0-9 only, channel selection will be made if

there is no operation within a few seconds.

If you push "0" by itself, nothing will happen.

Complete the above steps within a few seconds.

When you enter 0-9 and • (DOT), channel selection will be

made if there is no operation within a few seconds.

Changing Volume

You can change the volume by pressing VOL

the TV or on the remote control unit.

To increase the volume, press VOL

To decrease the volume, press VOL

Audio status

Output device

Output Select

Fixed Variable

Speaker Variable sound Mute

When "Output Select" is set to "Variable", the indicator on

the screen changes as shown below.

See page 26 for details on the Output Select function.

MUTE

Mutes the current sound output.

Press MUTE.

" " will be displayed on the screen for 30 minutes, and

the sound is silenced.

Within 30 minutes of pressing MUTE, mute can be

canceled by using one of the methods below.

- Mute will be canceled if you press VOL

or MUTE.

Mute will be canceled after 30 minutes have passed.

However, the TV will not suddenly output a loud sound as

the volume level is set to 0 automatically.

•

LC-3237D64UE02.indd13LC-3237D64UE02.indd13 2007/12/1911:37:002007/12/1911:37:00

AV MODE

AV MODE gives you 8 viewing options to choose from

to best match the surrounding environment of the TV,

which can vary due to factors like room brightness,

type of program watched or the type of image input

from external equipment.

Press AV MODE. Current AV MODE displays.

Press AV MODE again before the mode displayed on the

screen disappears. The mode changes as shown below:

Example:

When the input source is TV, INPUT 1, 2 or 3 terminals

STANDARD MOVIE GAME USER [TV]

DYNAMIC DYNAMIC (Fixed)

Example:

When the input source is INPUT 4, 5 or 6 terminals

STANDARD MOVIE GAME PC xvYCC *

DYNAMIC DYNAMIC (Fixed) USER[ ]

"xvYCC" can only be selected when an xvYCC signal is

input using INPUT 4 and 5.

STANDARD: For a highly deﬁ ned image in a normal

lighting.

[Enhanced Picture Contrast: on]

MOVIE: For a movie.

[Enhanced Picture Contrast: off]

GAME: Lowers image brightness for easier viewing.

[Enhanced Picture Contrast: off]

PC: For PC.

[Enhanced Picture Contrast: off]

xvYCC: Supports the xvYCC international standard

for wide color space. The xvYCC signal allows you

to experience colors that conventional color signals

cannot reproduce.

[Enhanced Picture Contrast: off]

USER: Allows the user to customize settings as desired.

You can set the mode for each input source.

[Enhanced Picture Contrast: off]

DYNAMIC (Fixed): Changes the image and sound

settings to the factory preset values. No adjustments

are allowed.

[Enhanced Picture Contrast: on]

DYNAMIC: For a clear-cut image emphasizing high

contrast, useful for sports viewing.

[Enhanced Picture Contrast: on]

You can select a different AV MODE item for each input

mode. (For example, select STANDARD for TV input and

DYNAMIC for INPUT 1.)

When you play games, "GAME" is recommended for AV

MODE.

"Enhanced Picture Contrast" technology detects the source

video characteristics and smoothly adjusts the screen

brightness accordingly to realize deeper black levels.

•

Direct Button Operation

AUDIO

■

MTS/SAP stereo mode

The TV has a feature that allows reception of sound

other than the main audio for the program. This feature

is called Multi-channel Television Sound (MTS). The TV

with MTS can receive mono sound, stereo sound

and Secondary Audio Programs (SAP). The SAP

feature allows a TV station to broadcast other

information, which could be audio in another language

or something completely different like weather

information.

You can enjoy Hi-Fi stereo sound or SAP broadcasts

where available.

Stereo broadcasts: View programs like live sporting

events, shows and concerts in dynamic stereo sound.

SAP broadcasts: Receive TV broadcasts in either MAIN or

SAP sound.

MAIN sound: The normal program soundtrack (either in

mono or stereo).

SAP sound: Listen to a second language, supplementary

commentary or other information. (SAP is mono sound.)

If stereo sound is difﬁ cult to hear.

Obtain a clearer sound by manually switching to ﬁ xed

mono-sound mode.

You can change MTS as shown below to match the television

broadcast signal.

Press AUDIO to toggle between audio modes.

Examples: when receiving MTS and SAP

STEREO mode:

STEREO MONO

STEREO + SAP mode:

ST(SAP) SAP(ST) MONO

MAIN + SAP mode:

MAIN SAP

MONO mode: MONO

■

Digital broadcasting audio mode

The types of audio transmitted in a digital broadcast include

SURROUND as well as MONO and STEREO. In addition, it

is possible for multiple audio tracks to accompany a single

video track.

Press AUDIO to toggle between audio modes.

Example: when receiving Digital broadcasting

STEREO (Audio1) STEREO (Audio2)

SURROUND (Audio3)

MTS only operates while in TV mode.

•

LC-3237D64UE.indb14LC-3237D64UE.indb14 2007/12/139:18:542007/12/139:18:54

Air ANALOG

Audio : MONO

CC : 1/2 CC1

Ratings : NONE

1/3 ENG 2/3 CC1 3/3 Text1 Off

Your TV is equipped with an internal Closed Caption

decoder. It allows you to view conversations, narration

and sound effects as subtitles on your TV. Closed

Captions are available on some TV programs and on

some VHS home video tapes at the discretion of the

program provider.

Digital Closed Caption service is a new caption service

available only on digital TV programs (also at the

discretion of the service provider). It is a more ﬂ exible

system than the original Closed Caption system,

because it allows for a variety of caption sizes and font

styles. When the Digital Closed Caption service is in

use, it will be indicated by the appearance of a 3-letter

abbreviation that also indicates the language of the

Digital Closed Captions: ENG (English), SPA (Spanish),

FRA (French) or other language codes.

Not all programs and VHS videotapes offer closed

captions. Please look for the “

” symbol to ensure

that captions will be shown.

In the Closed Caption system, there can be more than

one caption service provided. Each is identiﬁ ed by its

own number. The “CC1” and “CC2” services display

subtitles of TV programs superimposed over the

program's picture.

In the Closed Caption system, the “Text1” or “Text2”

services display text that is unrelated to the program

being viewed (e.g., weather or news). These services

are also superimposed over the program currently

being viewed.

Depending on the number of caption services in the

signal being received, you will see information such as

1/2 or 1/4 displayed.

1/2 means “the ﬁ rst of two services”.

Example:

If a program has three services (Digital CC(ENG), CC1

and Text1), the closed caption display will toggle in this

sequence:

•

The CC button keeps a record of the last service

selected in its memory.

If the last closed caption mode (e.g. 1/3ENG) you

selected is not available for the next program, or on

another channel, the closed caption service that is

available is automatically selected, and this service

appears in parentheses, e.g. “1/3(CC1)”.

Closed Caption services that appear in parentheses will

not be stored in the CC button's memory as your last

selected service. Only services that you have selected

with the CC button are stored.

Examples:

In a case where there are two closed caption

services provided (for instance, Digital CC(ENG)

and CC1), and Digital CC(ENG) is displayed

as your current selection, if Digital CC(ENG) is

not broadcast for the next program, the other

closed caption service, CC1, will be displayed in

parentheses.

A closed caption service appears in parentheses

because the service you selected is not available

and a different service is displayed on your screen.

“1/1(CC1)” is displayed instead of “1/2/ENG”.

•

Press CC.

This will present the Closed Caption information

display.

•

Press CC while the Closed Caption information is

still on the screen.

Press repeatedly until you select the desired closed

caption service.

•

Closed Caption

information

See page 27 for detailed closed caption settings.

When the program contains no closed caption, “--” displays

in the closed caption information.

If the language code, e.g. “ENG”, is not found on Digital TV

programs, “--” will be shown.

Four kinds of closed caption service (CC1, CC2, Text1,

Text2) are potentially available, but a broadcast may contain

none or only some of these services at the discretion of the

program provider.

•

Direct Button Operation

Closed Captions and Digital Closed Captions

LC-3237D64UE.indb15LC-3237D64UE.indb15 2007/12/139:18:552007/12/139:18:55

Direct Button Operation

VIEW MODE

You can select the screen size.

Press VIEW MODE.

The View Mode menu displays.

The menu lists the View Mode options selectable for the type of video signal currently being received.

Press VIEW MODE or

while the View Mode menu is displayed to select a desired item on the menu.

You can sequentially select a View Mode that has its own aspect ratio.

■

For 4:3 programs

Example: Screen size images

Side Bar S.Stretch (Smart stretch) Zoom Stretch

Suitable for viewing

conventional 4:3 programs in

their normal format.

Suitable for stretching 4:3

programs to ﬁ ll the screen.

Suitable for viewing wide-

screen 2.35:1 anamorphic

DVDs in full screen.

This mode is useful for 1.78:1

DVDs. When viewing 1.85:1

DVDs, stretch mode will still show

very thin black bands at the top

and bottom of the screen.

■

For HD programs

Stretch: Suitable for viewing wide-screen 1.78:1 aspect ratio program, stretch mode will still show very thin black bands at

the top and bottom of the screen.

Dot by Dot (1080i/p only): Detects the resolution of the signal and displays an image with the same number of pixels on

the screen.

Full Screen (720p only): You can select "Full Screen" only when receiving a 720p signal.

S.Stretch (Smart stretch): Suitable for stretching 4:3 programs to ﬁ ll the screen.

Zoom: Suitable for viewing wide-screen 2.35:1 aspect-ratio programs in full screen.

When using Dot by Dot, it is possible to see noise or bars around different outer portions of the screen. Please change view

mode to correct this.

■

For PC input mode

Connect the PC before making adjustments. (See page 11.)

Selectable screen size may vary with input signal type.

Example: Screen size images

Input signal Normal Zoom Stretch Dot by Dot

4:3

Keeps the original

aspect ratio in a full

screen display.

For viewing

widescreen

programs. The top

and bottom of the

image is cropped.

An image fully ﬁ lls the

screen.

Detects the resolution

of the signal and

displays an image with

the same number of

pixels on the screen.

Input signal Stretch Dot by Dot

16:9 An image fully ﬁ lls the

screen.

Detects the resolution

of the signal and

displays an image with

the same number of

pixels on the screen.

•

LC-3237D64UE02.indd16LC-3237D64UE02.indd16 2007/12/1911:37:132007/12/1911:37:13

Menu Items

Some menu items may not be displayed depending on the selected input source.•

Picture Menu

OPC ..................................................................................... Page 19

Backlight .............................................................................. Page 19

Contrast .............................................................................. Page 19

Brightness .......................................................................... Page 19

Color ................................................................................... Page 19

Tint ...................................................................................... Page 19

Sharpness .......................................................................... Page 19

Advanced

C.M.S.-Hue ............................................................. Page 19

C.M.S.-Saturation ................................................... Page 19

Color Temp. ............................................................ Page 19

Active Contrast ........................................................ Page 19

I/P Setting ................................................................ Page 20

Film Mode ............................................................... Page 20

3D-Y/C .................................................................... Page 20

Monochrome ........................................................... Page 20

Range of OPC ......................................................... Page 20

Reset .................................................................................. Page 19

Audio Menu

Treble ................................................................................. Page 20

Bass ..................................................................................... Page 20

Balance ................................................................................ Page 20

Surround .............................................................................. Page 20

Bass Enhancer .................................................................... Page 20

Reset .................................................................................. Page 20

Power Control Menu

No Signal Off ....................................................................... Page 21

No Operation Off ................................................................. Page 21

Setup Menu

EZ Setup .............................................................................. Page 21

CH Setup ............................................................................. Page 22

Antenna Setup-DIGITAL ...................................................... Page 22

Input Skip ............................................................................ Page 22

Input Label .......................................................................... Page 22

Parental CTRL .............................................................. Pages 23-25

Position ................................................................................ Page 23

Language ............................................................................. Page 23

Reset ................................................................................... Page 23

Option Menu

AQUOS LINK Setup ..................................................... Pages 32-34

Audio Only ........................................................................... Page 26

Digital Noise Reduction ....................................................... Page 26

Input Select ......................................................................... Page 26

Output Select ...................................................................... Page 26

Color System ....................................................................... Page 26

Caption Setup ..................................................................... Page 27

Digital Caption Info. . ........................................................... Page 27

Program Title Display ......................................................... Page 27

Favorite CH ......................................................................... Page 27

Game Play Time .................................................................. Page 27

Operation Lock Out ............................................................. Page 27

Digital Setup Menu

Audio Setup ......................................................................... Page 28

Identiﬁ cation ........................................................................ Page 28

Software Update .......................................................... Pages 28-29

On-Screen Display Menu

For TV/INPUT 1/2/3 Mode

For HDMI/PC-IN Mode