Loading ...
Loading ...
Loading ...
English 7
STEP 1:
Pull the spring-loaded collar of the wand back
to insert your choice of quick connect nozzle.
Release the collar and push the nozzle until
the collar clicks.
CAUTION
High pressure in nozzle area.
Risk of injury caused by improperly locked
nozzle.
n Make sure you hear a "click" when inserting
the nozzle tip into the wand.
n Pull the nozzle to make sure it is seated properly
before operating your unit.
STEP 2:
Pull back the spring loaded collar at the spray
gun and insert the high pressure hose.
Release the collar and push the high pressure
hose until the collar clicks.
CAUTION
Engine shipped without oil. Before starting
engine, fill with oil. Do not over-fill. Do not run
the engine with a high or low oil level as this
can cause engine damage.
If you have further questions regarding the en-
gine, please refer to the engine manual included
with the unit.
STEP 3:
Check oil level. Insert and remove dipstick
without screwing it into the filler neck. Check
the oil level shown on the dipstick.
Be sure the machine is level when checking the
oil level. (Refer to the engines operating manual
for seasonal grades).
We recommend that the oil be changed after
the first 5 hours of use, then once every 50
hours.
STEP 4:
Fill gas tank with unleaded gasoline.
Do not use leaded gasoline.
Do not add oil to the gasoline.
STEP 5:
Pull back the spring loaded collar at the high
pressure outlet and insert the high pressure ho
se.
Release the collar and push the high pressure
hose until the collar clicks.
FULL / MAX
ADD / MIN
OPERATING INSTRUCTIONS
Loading ...
Loading ...
Loading ...