Loading ...
Loading ...
Loading ...
−−0.024 0.028 in (0.60 0.70 mm)
77
Spark Plug
Servicing Your Honda
An improperly tightened spark plug can
damage the engine. If a plug is too loose, a
piston may be damaged. If a plug is too tight,
the threads may be damaged.
Tighten the spark plug:
Disconnect the spark plug cap.
Clean any dirt from around the spark plug
base.
Remove the spark plug with a plug wrench.
Inspect the spark plug electrodes for wear.
The center electrode ( ) should have square
edges. The side electrode ( ) should not be
eroded. The insulator should not be cracked
or chipped.
Check the spark plug gap ( ), using a wire-
type feeler gauge. If adjustment is necessary,
bend the side electrode carefully. The gap
should be:
Make sure the plug washer is in good
condition.
If you have to install a new plug, first check
the gap.
With the plug washer attached, thread the
sparkpluginbyhand(topreventcross-
threading).
If the old plug is good:
1/8 turn after it seats.
If installing a new plug, tighten it twice to
prevent loosening:
First, tighten the plug:
NGK: turn after it seats.
DENSO: turn after it seats.
Then loosen the plug.
Next, tighten the plug again:
1/8 turn after it seats.
Reinstall the spark plug cap. Take care to
avoid pinching any cables or wires.
2.
3.
4.
5.
6.
7.1.
2
a)
b)
c)
8.
3/4
1
1
3
12/06/27 09:16:29 31KSJ680_086
Loading ...
Loading ...
Loading ...