Loading ...
Loading ...
Loading ...
18 lbf·ft (24 N·m , 2.5 kgf·m)
1.0 US qt (0.9
)
65
Engine Oil
Servicing Your Honda
Remove the old sealing washer ( ) and
install a new sealing washer on the drain bolt.
Install the oil fill cap/dipstick securely.
Start the engine. Let it idle 3-5 minutes, then
turn it off.
With the motorcycle held upright on level
ground, check the oil level.
If needed, add oil (page ) until it reaches
the upper level mark. (Do not overfill.)
Check for oil leaks.
Pour the recommended oil into the crankcase,
approximately:
Install the oil drain bolt and tighten to the
specified torque:
8.
9.
10.
11.
12.
13.
14.
2
63
12/06/27 09:14:22 31KSJ680_074
Loading ...
Loading ...
Loading ...