Loading ...
Loading ...
Loading ...
FOR THE IN STALLER
Lo ca tion:
After uncrating and inspection the unit is ready for
installation. Install the machine in a location where
it has enough space around it to be accessible for
service, and reserve a minimum of 6" at the back
for air circulation on air cooled models.
Avoid hot, dirty and crowded locations. Be sure
that the location for the machine is within the
limitations described on page 3.
Stor age Bin:
Tip the storage bin on its back, using parts of the
carton to protect the exterior finish. Install the legs
into the threaded holes in the bottom of the bin.
Turn the leg levelers all the way in preparation for
leveling later. Return the bin to the upright
position, remove paper covering the bin gasket.
Note: Do not push bin into position, instead lift it
there. Pushing a bin, especially one with ice in it,
can cause damage to the legs and the leg mounts.
Install the appropriate bin top on the bin, according
to the instructions for the bin top.
Ice Ma chine:
The machine is heavy, so the use of a mechanical
lift is recommended for lifting the machine high
enough to install on top of the bin. After the unit is
placed on the bin, line it up so it is even with the
back side. Secure the machine to the bin with the
hardware provided with the machine.
Remove the front panel and remove any shipping
blocks.
FME2404 or NME1854
January 2012
Page 4
Loading ...
Loading ...
Loading ...