Loading ...
Loading ...
Loading ...
Problem solving guide
77
With the help of the following guide, minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be remedied
without contacting Miele. This will save you time and money because you won't
need a service call.
Please note that a call-out charge will be applied to unnecessary service visits
where the problem could have been rectified as described in these operating
instructions.
Problem Possible cause and remedy
The display is dark. There is no power to the oven.
Check whether the mains circuit breaker has
tripped. If it has, contact a qualified electrician or
Miele.
The oven does not heat
up.
The system lock has been switched on.
Switch off the system lock (see “Clock/Timer -
Changing settings”).
There is no power to the oven.
Check if the circuit breaker has tripped. If it has,
contact a qualified electrician or Miele.
is flashing in the
display.
There has been a power cut.
Reset the time of day (see “Using for the first
time”).
Cooking times will also need to be reset.
appears
unexpectedly in the
display and is
flashing at the same
time. The buzzer might
also be sounding.
The oven has been operating for an unusually long
time and this has activated the safety switch-off
function.
Turn the function selector to 0. The oven is now
ready to use again immediately.
is lit up or flashing in
the display.
There has been a power cut which has caused the
Pyrolytic cleaning programme to stop.
The symbol will remain lit up and the door
locked until the temperature inside the oven has
dropped to below 280°C.
If you turn the function selector to0, the time of
day will flash in the display. You need to re-enter
the time of day (see “Using for the first time”).
Loading ...
Loading ...
Loading ...