Loading ...
Loading ...
Loading ...
54 Basic Operation & Riding
Starting & Stopping the Engine
Starting Procedure
This motorcycle has a fuel-injected engine with an automatic fast idle. Follow
the procedure indicated below.
Any Air Temperature
• Press the start button with the throttle completely closed.
The engine will not start if the throttle is fully open (because the electronic
control module cuts off the fuel supply).
Snapping the throttle or fast idling for more than about 5 minutes may cause
exhaust pipe discoloration.
Flooded Engine
If the engine fails to start after repeated attempts, it may be flooded with excess
fuel. To clear a flooded engine:
1. Leave the engine stop switch set to RUN.
2. Open the throttle fully.
3. Press the start button for 5 seconds.
4. Follow the normal starting procedure.
5. If the engine starts, open the throttle slightly if idling is unstable.
If the engine does not start, wait 10 seconds, then follow steps 1 – 4 again.
If the engine still won’t start, refer to If Your Engine
Quits or Won’t Start, page
149.
Loading ...
Loading ...
Loading ...