Loading ...
Loading ...
Loading ...
166 Taking Care of the Unexpected
If a Fuse Blows
4. To check or replace a circuit fuse, pull the old fuse out of its retaining clips
with the fuse remover. Look for a burned wire inside the fuse. If the fuse is
blown, replace it with a spare fuse of the same rating.
If you do not have a replacement fuse with the proper rating for the circuit,
install one with a lower
rating.
Replacing a fuse with one that has a higher rating greatly increases the chance
of damage to the electrical system.
5. Close the fuse box cover and install the left side cover (page 87).
Main Fuse Access:
Main Fuse A
1. Remove the right side cover (page 87).
2. Disconnect the wire connector of the starter magnetic switch.
3. Pull out the old fuse and install a new fuse.
The spare fuse is located behind the starter magnetic switch.
4. Reconnect the connector.
RIGHT SIDE
wire connector
spare main fuse
main fuse A
Loading ...
Loading ...
Loading ...